HomeEventsForumsLincoln TechRidesMerchandise


Engine Thermostat Replacement

  1. Drain coolant level below upper radiator hose and thermostat housing.

  2. Disconnect lower radiator, coolant recovery and engine return hoses at thermostat housing, then remove two thermostat housing retaining bolts.

  3. Remove O-ring seal and thermostat from thermostat housing.

  4. Inspect O-ring for damage and replace if necessary.

  5. Reverse procedure to install. Tighten to 7-8 ft lb.





















All photos, unless noted, copyright Lincoln Motor Company. Reproduction by any means other than for personal use is strictly prohibited.

Permission to use material on this site can be obtained by contacting the webmasters.


Website Designed by Vistitude Computer Solutions, Inc