HUGE list of parts for sale. LOOK!

P

Ponyfreak

Registered
Ok making more room. Here is what else I have to offer.

Fully ported/polished heads with +2mm vavles, springs, ect as bad ass as they get $3200
Crower Stage 3 cams $500
Canton Windage Tray 60$
Mezier Electric Water pump with all wiring $275
Used walboro 255l/hr pump $50
42lb injectors $200
New Steeda Underdrive pullies 100
Steeda TIming adjuster like new with new crank sensor $95
AJE tubular K member $300
Billit fuel rails for Gen 1 intake $95
Cobra IMRC control Boxes
Spark Plug covers 10$ a set
Powdercoated pullies obo
6 bolt flywheels $15
Mark VIII heads with cams $250
Stock mark VIII cams $50
Stock MAF 35$
Dual oil filter relocation kits. $30
B&M 26KGVRW cooler $25
Magnaflow exhasut tips $50
Stock 6 bolt crank std/std $50
All Brackets for DOHC inq
Stock CObra valve Covers $100
Vortech T rex fuel pump $50

First come first serve basis. First to get me the money gets the parts.
AJE K emmber
http://mark8.org/users/Eli/2/Parts for sale/DSC03395a.jpg
T-REx
http://mark8.org/users/Eli/2/Parts for sale/DSC03396a.jpg
Windage Tray
http://mark8.org/users/Eli/2/Parts for sale/DSC03399a.jpg
Fuel rails
http://mark8.org/users/Eli/2/Parts for sale/DSC03406a.jpg
Steeda timing adjsuter
http://mark8.org/users/Eli/2/Parts for sale/DSC03420a.jpg
Steeda underdrives
http://mark8.org/users/Eli/2/Parts for sale/DSC03421a.jpg
Dual oilfilter relocation
http://mark8.org/users/Eli/2/Parts for sale/DSC03422a.jpg
 
RE: HUGE list of parts for sale. LOOK!

Do yo have the oil filter block adapter as well in that kit ?
42# new or used ?
 
RE: HUGE list of parts for sale. LOOK!

Yes i have the adapter pieces that go on the il filter adapter that is bolted onto the block. They are not shown in the pic though. I will include hoses But I suggest purchasing new hoses, and cleaning the units with soap and water before using.

The 42's have about 5 hours of use on them. They are in excellant shape. All hats and o rings are perfect.
 
RE: HUGE list of parts for sale. LOOK!

Gee Joe, our lack of timing is impeccable. :D I just bought myself the Meziere electric water pump and the Painless Wiring relay kit for Christmas! Arghhhh!!

I got dibs on...

New Steeda Underdrive pullies 100
Steeda TIming adjuster like new with new crank sensor $95
Powdercoated pullies obo

Questions...

Does the underdrive pulleys include the alternator pulley?(The pic shows the crank and water pump pulleys?)
What pulleys do you have powdercoated & what color?
Did you show any positive results with the Steeda Timimg Adjuster setup?

At this rate, I could probably save a load on shipping by swinging by in the F250 on my next run out mid-west. ;)
 
RE: HUGE list of parts for sale. LOOK!

[div class="dcquote"][strong]Quote[/strong]
Gee Joe, our lack of timing is impeccable. :D I just bought myself the Meziere electric water pump and the Painless Wiring relay kit for Christmas! Arghhhh!!I got dibs on...New Steeda Underdrive pullies 100Steeda TIming adjuster like new with new crank sensor $95Powdercoated pullies oboQuestions...Does the underdrive pulleys include the alternator pulley?(The pic shows the crank and water pump pulleys?)What pulleys do you have powdercoated & what color?Did you show any positive results with the Steeda Timimg Adjuster setup?At this rate, I could probably save a load on shipping by swinging by in the F250 on my next run out mid-west. ;)
[/div]

Return the water pump and kit. I am sure you got it at Summit or Jegs? All you need is that reciept.

I do not think that I have the alternator underdrive pully. I will dig around some more. If I have it I will include it. I think the set was $159 new. I have a silver alternator pully, silver water pump pullies.

The timing adjuster is worth the money. You can usually run 14 degrees base timing (4 degrees advanced)all the time. If you could find out when the knock sensors were trigering you could run with more timing. Most liekly around 6 adv. Advancing the timing always improves HP.

I have been through Charslton WV headed down 64/77 about 5 times in the last 2 months. I will be headed through there again on the 15th or so. Let me know what you want to do. Just tell me you want that convertor and you will make me happy.... lol.
 
RE: HUGE list of parts for sale. LOOK!

How old is that fuel pump?? Did you run it with a new Fuel Pressure Regulator?
 
RE: HUGE list of parts for sale. LOOK!

Pump has about 500 miles on it. Yes I ran it with an aeromotive FPR.
 
RE: HUGE list of parts for sale. LOOK!

I would gladly buy the fuel pump but only if I don't need a new FPR is it the high pressure, or the low pressure one?
 
RE: HUGE list of parts for sale. LOOK!

YOu do not need an adjustable fuel pressure regulator for this fuel pump. I am running the exact same setup in my red car now with a 255 as you are. No problems whatsoever.
 
RE: HUGE list of parts for sale. LOOK!

Hey Joe,

Would you have the tension pulley (bracket) for the serpentine belt?


David O'Donnell
'97 Mark VIII LSC "Maxine II" (RIP Maxine I, 5-16-03)
'91 Mark VII BB "Monica"
'67 Thunderbird "Molly"
 
RE: HUGE list of parts for sale. LOOK!

I am pretty sure I have an extra tensioner arm. Are you needing just the arm?
 
RE: HUGE list of parts for sale. LOOK!

I'm assuming I just need the arm. Lets just say I can change the belt by hand if I wanted to!

David O'Donnell
'97 Mark VIII LSC "Maxine II" (RIP Maxine I, 5-16-03)
'91 Mark VII BB "Monica"
'67 Thunderbird "Molly"
 
RE: HUGE list of parts for sale. LOOK!

Ohh wow. The spring in the tensioner must be broken. I will check and see waht I have.
 
RE: HUGE list of parts for sale. LOOK!

By chance you dont have a console lid laying around do ya. I don't really car what color it is I jst need the latch assebly out of it. Or for that fact a driverside exterior door handle and a passenger side turn signal lamp?

Just wondering.

chris
 
RE: HUGE list of parts for sale. LOOK!

[div class="dcquote"][strong]Quote[/strong]
By chance you dont have a console lid laying around do ya. I don't really car what color it is I jst need the latch assebly out of it. Or for that fact a driverside exterior door handle and a passenger side turn signal lamp?Just wondering.chris
[/div]

Console lid I threw away. The lid and latch were hammered. SOld the door handle, but miht have a passenger side turn signal lamp. I will psot back.

Glad to hear you got the parts J.
 
RE: HUGE list of parts for sale. LOOK!

Thanks Joe, much appreciated

David O'Donnell
'97 Mark VIII LSC "Maxine II" (RIP Maxine I, 5-16-03)
'91 Mark VII BB "Monica"
'67 Thunderbird "Molly"
 
UPDATED LIST

UPDATED LIST

Here is the updated list since the board will not let me edit.

Fully ported/polished heads with +2mm vavles, springs, ect as bad ass as they get $3200
Crower Stage 3 cams $500
Canton Windage Tray 60$
Mezier Electric Water pump with all wiring $275

42lb injectors $200

AJE tubular K member $300
Billit fuel rails for Gen 1 intake $95
Cobra IMRC control Boxes

Spark Plug covers 10$ a set
Powdercoated pullies obo
6 bolt flywheels $15
Mark VIII heads with cams $250
Stock mark VIII cams $50
Stock MAF 35$
Dual oil filter relocation kits. $30
B&M 26KGVRW cooler $25
Magnaflow exhasut tips $50
Stock 6 bolt crank std/std $50
All Brackets for DOHC inq
Stock CObra valve Covers $100
Vortech T rex fuel pump $50
 
RE: UPDATED LIST

RE: UPDATED LIST

is that k member worth it? is it a must when you wanna build an engine? it'd make the front end lighter, but is it strong enough?
 
You must log in or register to reply here.
Back
Top