Turn Signal Bulb Replacement

joemark8

Registered
SECOND REQUEST
Could someone send me the instructions on how to replace the Turn Signal/Parking Light bulb for my 98 Mark Basic Model. I was given some earlier instructions but I think someone provided me with the instuctions for an earlier Mark.
 
RE: Turn Signal Bulb Replacement

If it is the front,:
1. Remove the radiator upper sight shield.
2. Remove the retaining screw from the headlamp. (outside)
3. Remove the mounting bolts from the headlight. (from top)
4. Remove the headlight assembly.
5. Pull the headlight assembly forward and disconnect all the wiring.
6. Replace the turn signal lamp by twisting the socket. counterclockwise and do the same to remove the bulb from the socket. if needed.
7. To install, reverse the removal process.

If it is the rear:
1. Move the carpet in the trunk aside behind the lamp housing.
2. Remove the 3 nuts that hold the housing in the vehicle.
3. Push the rubber grommet through the sheet metal.
4. Replace the lamp.
5. To install, reverse the removal process.

That is what the '98 service manual says.
 
Back
Top