RE: Low washer message?
I just changed my washer fluid sensor yesterday. This was a little bit harder for the first gen.
I removed the plastic over the headlights. Then I removed the headlights. Next I took off the plastic around the wheels. After that I removed the bumper. This only took a few screws and I had to unclip the bumper under the headlight housing.
Once the bumper was off I had to unbolt the Trans cooler (two bolts). Then it was 4 bolts to get off the washer fluid tank off, three on the bottom and one at the top.
When I got the tank lose I just moved it closer to the radiator and changed the sensor. It was on top and easy to see.
A little harder than I expected but I am so happy I did it.