Thought I'd post this headache, as I couldn't see this topic on an earlier sort. Also have a question on LCM compatibility between Gen 1 & 2 Mark VIII's.
When it's not the bulb (I swapped with a working side), not the socket (I measured 12V @ the socket), and not the fuse(s) it may be the Lighting Control Module (LCM). In my case, the voltage was supplied, but the LCM couldn't provide the amperage to kick on the light. I was able to swap out the left to right outputs from the LCM to validate that it was the issue.
Now for the question: Is the LCM the same for Generation 1 & 2 Mark VIII's?
Regards,
Laurent
97 LSC
97
94
93
When it's not the bulb (I swapped with a working side), not the socket (I measured 12V @ the socket), and not the fuse(s) it may be the Lighting Control Module (LCM). In my case, the voltage was supplied, but the LCM couldn't provide the amperage to kick on the light. I was able to swap out the left to right outputs from the LCM to validate that it was the issue.
Now for the question: Is the LCM the same for Generation 1 & 2 Mark VIII's?
Regards,
Laurent
97 LSC
97
94
93