Need front end rebuild advice

I plan on rebuilding the front end on my car this weekend. Here is a list of the parts I plan on replacing:
both upper control arms
both inner tie rod ends
new 1 1/4" sway bar
M12 Poly bushing kit
Left front hub

My question is what order should I do this in???? I was thinking
1. upper control arms
2. inner tie rod ends
3. sway bar
4. bushing kit
5. front hub

Also I plan on buying a 36 mm socket for the hub install any other special tools I should get??? Like maybe inner tie rod tool???
I do have a air compressor and an impact wrench and a air ratchet.

Anything else I should replace while I am at it??? I did replace the front air bags about two years ago and they don't leak.

Thanks John

Next weekend I will work on the rear shocks and bushing.

RE: Need front end rebuild advice

I can't think of any specific order. Just take everything apart and put it back together with the new parts. If you really look at what you have to do for each procedure, you'll notice that some parts of the procedures are similar, and a logical order may become clear.

Good luck!