Chevrolet Corvette ZR1 (2008)

andykhol23

Registered
http://www.justmorecars.com/chevrolet/2008-corvette_zr1/

chevrolet-corvette_zr1_2008_800x600_wallpaper_01.jpg

chevrolet-corvette_zr1_2008_800x600_wallpaper_02.jpg


Chevrolet Corvette ZR1
Chevrolet officially announced the 2009 Corvette ZR1 - an American supercar that brings the technology and engineering refinement of carbon-fiber, ceramics and electronics together in a distinctive design.

chevrolet-corvette_zr1_2008_800x600_wallpaper_05.jpg

chevrolet-corvette_zr1_2008_800x600_wallpaper_06.jpg


"Chevrolet's goal with the new ZR1 is to show what an American supercar can deliver, at a price that trumps exotics that cost two, three or four times as much - and does so with exceptional driveability," said Ed Peper, Chevrolet general manager.

The ZR1's basic stats:

All-new LS9 supercharged 6.2L V-8 targeted at producing at least 100 horsepower per liter, or 620 horsepower (462 kW), and approximately 595 lb.-ft. of torque (823 Nm)
Six-speed, close-ratio, race-hardened manual transmission
New, high-capacity dual-disc clutch
Higher-capacity and specific-diameter axle half-shafts; enhanced torque tube
Specific suspension tuning provides more than 1g cornering grip
Twenty-spoke 19-inch front and 20-inch rear wheels
Michelin Pilot Sport 2 tires - P285/30ZR19 in front and P335/25ZR20 in the rear - developed specifically for the ZR1
Standard carbon-ceramic, drilled disc brake rotors - 15.5-inch-diameter (394-mm) in the front and 15-inch-diameter (380-mm) in the rear
Larger brake calipers with substantially increased pad area
Standard Magnetic Selective Ride Control with track-level suspension
Wider, carbon-fiber front fenders with ZR1-specific dual vents
Carbon-fiber hood with a raised, polycarbonate window - offering a view of the intercooler below it
Carbon-fiber roof panel, roof bow, front fascia splitter and rocker moldings with clear-coated, exposed carbon-fiber weave
ZR1-specific full-width rear spoiler with raised outboard sections
Specific gauge cluster with boost gauge (also displayed on the head-up display) and 220-mph (370 km/h) speedometer readout
Only two options: chrome wheels and a "luxury" package
Curb weight of approximately 3,350 pounds (1,519 kg)
The specialized components of the new ZR1 work harmoniously to deliver the most powerful and fastest automobile ever produced by General Motors. Performance estimates will be announced closer to vehicle's summer 2008 launch.

"Preliminary testing shows the ZR1 builds on the highly respected Corvette Z06 in every performance category, from acceleration and braking, to cornering grip and top speed," said Peper. "It all boils down to the power-to-weight ratio and the ZR1's is exceptional - better than the Porsche 911 GT2, the Ferrari 599 and even the Lamborghini LP640. In fact, the ZR1 is expected to be the first production Corvette to achieve a top speed of at least 200 mph."

By the numbers

In addition to the exterior cues and powertrain, ZR1 models will be distinguished from other Corvette models by their VIN. Each will carry a unique, identifying VIN digit, as well as a sequential build number. This makes it easy to determine the build number of a specific car - information treasured by enthusiasts and collectors. For example, a ZR1 with a VIN ending in "0150" would indicate it is the 150 th ZR1 built for the model year.
 
Last edited:
Pretty neat vette. although i am not a huge fan of the plastic engine window or the blue engine cover.
 
Pretty neat vette. although i am not a huge fan of the plastic engine window or the blue engine cover.

+1. Seems kinda pointless to have a window that only shows the engine cover below. I wanna see mechanicals!

I like Corvettes alot! I must get one within the next 10 years! My all time favorite car though is not the ZR1, but the C4 ZR-1.
 
Pretty neat vette. although i am not a huge fan of the plastic engine window or the blue engine cover.

That is not a decorative engine cover that is the top of the intercooler over the supercharger.

See this pic i took at the auto show
DSC04034.jpg
 
+1. Seems kinda pointless to have a window that only shows the engine cover below. I wanna see mechanicals!

I like Corvettes alot! I must get one within the next 10 years! My all time favorite car though is not the ZR1, but the C4 ZR-1.

A guy that runs with us has a c4 zr1, he got it like 4 to 5 years ago with only 12k miles on it

560481410_9fd6d7e475_b.jpg
 
I stand corrected on the not being able to see the mechanical stuff through the window then! Sweet pics too! Btw, that 'vette pic you put up, thats a standard C4 right? Looks like it. Still, i think C4s are a great looking car!

That LT-5 was a nice motor... then GM went backwards and went back to pushrod engines for the 'vette:confused: Maybe the production costs were too much.

Never been in a moving Corvette... Maybe Jamie98lsc's father in law can make my dreams come true? (hint hint - lol)
 
Last edited:
I stand corrected on the not being able to see the mechanical stuff through the window then! Sweet pics too! Btw, that 'vette pic you put up, thats a standard C4 right? Looks like it. Still, i think C4s are a great looking car!

That LT-5 was a nice motor... then GM went backwards and went back to pushrod engines for the 'vette:confused: Maybe the production costs were too much.

Never been in a moving Corvette... Maybe Jamie98lsc's father in law can make my dreams come true? (hint hint - lol)

That is a C4 ZR1
 
Ah... i see now... The pics and model i had are a later ZR-1 with the face lifted front, ZR-1 side badges and slightly different flanks. I guess the main visual difference on the earlier ones from the standard 'vettes was the squared off rear end? I read that later on, Lotus reworked the cylinder heads to take HP from 380 to 405.
 
as frank from "everybody loves ramon" would say.... "HOLY CRAP".
that freaking thing is gonna be sick. look at that charger!
 
I like Vettes but everyone expects them to be fast.....a 4 door pickup on the otherhand, pushing 600rwhp, really freaks people out. Especially Vette owners. :D
 
the number 1 production 09 zr-1 is already sold, they sold it on barrett jackson, but the bidder did not get the car there, he had to wait for it to be built, pretty cool being the person who gets car number 1 off the line, plus he gets to go to kentucky to watch it be build, maybe this happend already im not sure but the car sold for a million or 1.5 something stupid like that, bidder was a "more money then brains" kinda guy!
 
Some people that I know just came back from the factory tour last week. The only ZR1 coming off the line at this time were the prototypes.
Per my friend the driver of the carrier believes the wheels on the dark red z06 will be the 2009 Z06 wheels.


IMG_5503.jpg


IMG_5509.jpg


IMG_5510.jpg


IMG_5511.jpg


IMG_5512.jpg


IMG_5513.jpg


IMG_5515.jpg


IMG_5516.jpg


IMG_5517.jpg
 
haha i was gonna

haha i was gonna

Say the same thing Driller. I really like the new Vettes. They did a good job with the lines and tying everything together with a new more modern look. I dont like the see through hood either, but that car is sweet. I like them, especially the new interiors.
 
Back
Top