Lowered my Mark yesterday!

shospeed

Registered
Well yesterday after receiving some "O" ring that I had ordered from strutmasters I desided to lower the car be relocating the front and back sensors.

To be honest I Love my car even more now!!!

This is how it sat all high!
SU1HMDAxNjcuanBn.jpg

SU1HMDAxNjUuanBn.jpg

SU1HMDAxNjYuanBn.jpg


now a side by side comparison!
SU1HMDAxNjUuanBn.jpg

SU1HMDAxNzMuanBn.jpg


and all done !
the back was lowered about .5"-1".

SU1HMDAxNzUuanBn.jpg


the front about 1"-1.5"!
SU1HMDAxNzMuanBn.jpg

SU1HMDAxNzIuanBn.jpg

SU1HMDAxNzEuanBn.jpg

SU1HMDAxNzAuanBn.jpg

SU1HMDAxNzYuanBn.jpg



Thanks for all the help guys!
 
Sorry just kidding, I thought someone else would say your front wheels are on backwards. LOL

I like the lower look . I'll have to do that to mine.
 
Yeah !
I notice that too!
I'm up for an alignment in about 3k miles, I plan to get them fixed then. :)
 
I noticed that the rear pasanger side its alittle lower then the rear driver side.

Is this normal?
Is it beacuse the mark only has 1 hight sensor on the back?
 
I noticed that the rear pasanger side its alittle lower then the rear driver side.

Is this normal?
Is it beacuse the mark only has 1 hight sensor on the back?

If there are no suspension issues in the rear, usually the side to side height in the rear is caused by a slight difference in the side to side height adjustment of the fronts. It only takes an 1/8" or so on the front to influence the rear substantially more.
 
Back
Top