NOS installed, Looses power at WOT?

Ok, I've installed and set up the wet nitrous system. The WOT setting seems to be correct. It's opening the valves at WOT like I'd expect. The problem is, I loose power (a LOT) at WOT from a stand still. While moving and WOT I notice no power increase, maybe a little reduction.

Questions: What else do I need to change to get this nitrous working properly? I'd like to hear from the rest of you who have wet nitrous running. Do I need a stronger fuel pump? Mod chip? It's almost like the engine is being retarded or something to compensate for all the extra fuel and O2. Like the computer isn't allowing me to go WOT properly?

RE: NOS installed, Looses power at WOT?

im assuming you have the bottle on

sounds like you are giving it full fuel with no spray

its also sounds like you should take it off till you learn what you are doing so you dont blow up the motor

and yes you need to upgrade the fuel pump and get a chip burnt more than likely

RE: NOS installed, Looses power at WOT?

I dont know more than "common knowledge" about nitrous.

How big of a shot are you running?

(lol) Do you have traction control on?

It sounds like you are running pretty rich.

RE: NOS installed, Looses power at WOT?

BIGGER fuel pump and injectors are always reccomended. also make sure your connections are solid electrical and hoses, and get some professional help :9 . Good luck

RE: NOS installed, Looses power at WOT?

With injectors you also NEED an MAF.

I got brand new 42lb injectors with a new 255 Walbro High Pressure Pump and a Used Pro-M MAH cal'd for the 42#ers for $475 shipped for my Blown Mark VIII>