94 Parts Car, Tell me what you need!

9

95blklsc

Registered
I still have my parts car around, it's a black on black 94 with 90k.

Here is what ISN'T available
-engine & trans
-center console
-Front seats
-carpet- it's junk
-radiator
-condensor
-front subframe
-fenders
-front bumper
-trunk lid
-front air springs leaked down over time
-front windshield glass

Nearly everything else is available. E-mail me rommayo@aol.com with your needs.

The seal on the rear glass is perfect, it is for sale as long it can be removed.
 
Yup,I got your e-mail and while you are checkin on those parts,how about checkin out the heater control head.I could use it too cause it looks like the one I was trying to buy was sold.
 
They need some cleaning. I already have somone who wants the rear center belts. I'll see how they clean up and try to put a few pics up in the next few days.
 
I need the Brake-On-Off switch, please.

More specifcially, I don't exactly need the switch, but I need the wiring connector that snaps into the switch. The switch itself connects to the brake pedal, 2 wires come from up in the dash and connect to a single piece, which then connects to the switch. if you could snip those 2 wires with about 3-4" lead and the connector... I need that piece!

please email me david dot carnley at gmail.com or PM me here

thanks!
-David
 
David.....you can use basic spade connectors for this BOO switch connector, if you want to go the "easy" route that is. Just get the style that has the little plastic cover to protect it, than put some electrical tape around both of them.
 
J said:
David.....you can use basic spade connectors for this BOO switch connector, if you want to go the "easy" route that is. Just get the style that has the little plastic cover to protect it, than put some electrical tape around both of them.
Click to expand...

I appreciate that, but I've been fighting with these conenctors for a while now... I've got spades on there now, they seem tight enough, but periodically they come loose. not hanging-off loose, but loose enough to not work anymore :( I've got a new BOO switch to install, would like to get new connector just to make it "whole".
 
You must log in or register to reply here.
Back
Top