I've been playing with the height sensors in the front and after adjusting them both to 24 1/2" the rears are now both the same.
I raised the rears to 24 3/4" so car sits a little higher than stock.
A fun afternoon crawling around under the car!
I did use dielectric grease on the orings as...
Thanks for the quick reply!
Last night after posting my message I decided to replace the o-rings and 10 hours later car is back to normal!
Sometimes the obvious is the answer. I didn't replace them because I had replaced the solenoid only 2 years ago.
My next project will be adjusting the left...
My car has always had the driver's side rear at least 3/4" lower than the passenger side rear.
I tried adjusting the rear ride height sensor down all the way but it didn't make any difference.
I replaced the solenoid valve on the drivers rear bag but that didn't change anything.
I replaced the...