RE: Driver side door panel
Actually, its pretty simple. There are 2 screws. one is in the light, and the other is in the area of the inner door handle. Pull the handle towards you and remove the cup behind it. Unbolt the handle itself. Remove the lens from the courtesy light - careful its brittle, dont break the tabs. Remove the screw. At the forward end of the door, carefully pry off the little black triangular piece. Find and remove the screw in the handle area. Lift the dooe panel UP! The panel hangs on the door in several areas. When you can reach them, unhook the wire connectors. Reverse the proceedure to reinstall.
