Front Turn and Corner Lite Bulbs

V

vipergts

Registered
Hey guys I own a 97 LSC and I recently bought some piaa super white bulbs for it I changed the reverse lites and they look cool and made a big difference I also had bought some for the front for the cornering lite and turn signal lite. The other day I wanted to change them but I could not because I could not get excess to them from under the hood!! and I could not figure out were to get excess to the bulbs! So is there anyone here who can tell me how you get to the front turn and signal bulbs so I can change them please? Thanks
 
RE: Front Turn and Corner Lite Bulbs

You have to unscrew the headlight assembly and pull it straight out the front of the car - then you can change the turn signal bulb. Don't forget the screw at the rear outside of the headlight assembly.

John
[link:mark8.org/lodnca|NorCal Chapter Website]
http://mark8.org/users/johnaec/Mark_VIII_s.jpg
'97 Mark VIII LSC
'96 T-Bird 4.6L
 
RE: Front Turn and Corner Lite Bulbs

thanks for the info um so is it a sraight forward job or do you have to be real carefull there is no chance of screwing up the hid or enything is there also do you know how many screws hold the lite assembly in and are they all on the top? thanks
 
RE: Front Turn and Corner Lite Bulbs

there are 3 screws on the top of the assy under the hood, 1 screw at the rearmost corner of the marker light on the outside, and 5 or 6 electrical connectors. Be careful not to drop and lose the screws on the top.
 
RE: Front Turn and Corner Lite Bulbs

Don’t worry, if you take it out, and tighten it back in, it will not mess up your beam alignment.. Its within the actual headlamp, so nothing to worry about. Takes about 5minutes to take out... 2 if you have a drill.

Good luck.
 
You must log in or register to reply here.
Back
Top