Need help

B

BlackMark8

Registered
Can someone here from BOC give me a location you might have here in the central florida area, i would like to get someone to edit mine for me and tuned for the 1/4 mile - can someone help? thanks
 
Apparently the post notification isn't working. We are located just southwest of Jacksonville. We do not have a chain of shops or tuners, I do all the tuning myself. Are you asking to have someone reburn your chip? Do you have one of our chips or an SCT chip?
 
i sent a private message i assume it is still giving you trouble i think jeff cleared up our miss understanding i do not have a chip i plan to purchase one from you and have you burn it. if you do what is the fee to have the chip changed when i ad mods such as gears and such i think my first post to you i had you under the impression i had a chip and wanted you to tune it. that is not the case i plan to get m chip and all of my tunes from you like i said before jeff has highly recomended you as everyone else from what i have read thank you for your time sorry for the confusion if any was caused
 
Last edited:
Kracker said:
i sent a private message i assume it is still giving you trouble i think jeff cleared up our miss understanding i do not have a chip i plan to purchase one from you and have you burn it. if you do what is the fee to have the chip changed when i ad mods such as gears and such i think my first post to you i had you under the impression i had a chip and wanted you to tune it. that is not the case i plan to get m chip and all of my tunes from you like i said before jeff has highly recomended you as everyone else from what i have read thank you for your time sorry for the confusion if any was caused
Click to expand...

I replied to your PM Kracker. Yes I understood that you didn't have a chip. My reburns are kind of complicated, I charge $40- $120 depending on the extent of the changes required in the program for our chips. If it's someone else's SCT chip we charge $100 - $250 since I have to now build a new program from scratch. To purchase a reburn you would select from the Additional Performance Program page of my website. I no longer offer .xtr files used with the Extreme Turner software. If you have a blue 9100 SCT Micro Flasher or an XCalibrator 1 you will need to ship the device to me and I will install the program for you. If you have a chip then you will also have to ship the chip back to me. The customer pays all shipping costs.

Those that are paid members here get a discount on the purchase of a chip or programmer also. You can reach me at 904 298-0268 M - F, 10 - 5 or email me at lonnie@blueovalchips.com if you want to go into the programming further.

Lonnie
 
robs said:
I understand. You get what you pay for!
Click to expand...

Folks here’s some background on why Robs is posting here and other threads in this site. If you search his posts you will see they are only post in threads that I have posted in or about my business. Robs has threatened to follow me around the Internet to try and belittle and discredit me as much as he possibly can. If you go back to this thread http://lincolnsclub.org/vbulletin/showthread.php?t=19969

Robs is the #1 example that I was talking about. From where the example left off… Even after his threats in the emails I still have and his cussing me out I still tried to contact him over the phone to try and straighten this out in addition to sending him 2 additional programs to try. What I got was “you had your chance” and now he’s accused me of trying to blow up his vehicle with my programming. I’ve since told him to go find another tuner, I’m done with him. During all this he has been posting sarcastic comments just as the one above and has even started a flame war on another site that had to be locked. It’s now become apparent that he’s going to continue to follow me to different websites basically trolling to find anywhere I post or I'm mentioned to spread his sarcasm and to impose doubt in peoples minds of my ability or company name. Through this he hopes to invoke another flame war and ultimately take down my name and company.

dontfeedthetroll.jpg
 
Last edited:
Lonnie, Robert holds no weight around here.

his cryptic message he left in this thread meant ZERO to anyone on this board except you.

Your really letting this robert guy "get to you"... which is ALL he's trying to accomplish.

I've seen the BS between you two over on TCCOA and while he might have "gotten some FANS" over there...but not here.

YOU Lonnie are the #1 tuner in the industy for the mark 8 folks.

I wouldn't give robert a thin dime for his tunes that he stole from you, or got by using deceitful tactic while he was your customer....NOR would I give any business to ANY person ASSOCIATED with Robert. Based on the BS they stirred up on the tccoa board.

Lonnie, DONT FEED THE TROLL!
 
Totally different guy. The guy you are referring to is Robert P. The problem I had with him was he was advertising on different sites that he was selling my products and or trying to present his products as the exact same as my transmission products. It is assumed by many and mostly those at TCCoA that if he builds a transmission or valve body and follows Jerry W’s procedures that his products would be the same as mine. When in fact my products whether built by me personally or BCA who I contract out when I can’t fit the builds into my schedule do not follow Jerry W’s exact procedures. A lot of R & D went into the transmissions and valve bodies I sell that is well beyond what is posted up on TCCoA’s tech pages. My products my be similar but they are not something that can be duplicated by just following a tech page. And I use only factory separator plates in all the builds unlike the laser cut plates Robert P uses without any quality control or tolerance inspections.

Take a look at the link for a background on Robs. http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1381656

When his problems began with the vehicle again he admitted to going in and changing the tune and then it would no longer run correctly. I then sent him the exact same program that had been running in the vehicle before he messed with it and the vehicle still wouldn't run properly. I don't know what happened or what he did. He blamed the problem on my tuning for the 3rd time. In the past other 2 times he blamed my tuning and I was then forced to help him trouble shoot his vehicle to clear my name and programming. Because I wouldn't bow down to his threats and once again trouble shoot his car he started the attacks on me. Even after the attacks I asked for him to conduct some testing such as put the car back to stock and all I got was cussing and "you had your chance" type of responses. I then tried calling him to resolve this and left messages but he refused to call me back. Even after all this I sent him 2 other trouble shooting programs to try and he then accused me of trying to blow up his car. So the guy has chosen his path.

I posted the info above to let people here know what he was up to. He is following me around to different sites and playing the Troll game. He's been able to get a few good tech threads with either my info or products on those sites locked or deleted in order to of course mess with me but ultimately reduce my reputation and productivity. So when you do see his sarcastic posts that to some won't make any sense and to others it may try to redirect away from BOC you know what he is up to. Search his posts and see what mean. Look at his sigs on the other sites.
 
Last edited:
That sucks Lonnie, but hey its only one guy. I've been seeing for years over on TCCoA how you are the number 1 guy for the MN12's and since I've had my Mark and been on the Lincoln boards, its the same here. Even if the whole situation was your doing, (which I'm not saying it is at all, I completely understand how ridiculous people can be) I still would come to you for my work. Your the best there is, I just can't wait to get my xcal to find out for myself. He may be an annoying hassle, but I really don't think this one guy can do much to ruin your reputation.
 
Hi Everyone, The mods are working to keep peace around here, and have engaged in this situation with that intention in mind. Kindly, please do not "fuel the fire". Also, if there is something said that you feel is not appropriate, or offends you, please click on the alert button and the mods will be happy to sort the matter out, and take appropriate action. Thanks! :)
 
Mike, I misunderstood who lonnie was talking about.. and I probably did make some comments that were no appropriate.

This goes with out saying.. you have "carte blanc" when it comes to my posts.
Feel free to delete,edit or whatever you feel needed... NO WORRIES from my end.

With that said.. I WILL try harder not to "inflame" situations with my comments.
Sorry Mike, Sharon and the rest of the mods.. I really dont mean to make "more work for you".

Will follow your instructions and hit the "notify" button rather than tossing gasoline on the fire.
(embarrassed look)
 
You must log in or register to reply here.
Back
Top