Sierra3
Registered
Seats used to be possessed. When you hit the function button, they did exact opposite of what you wanted, then started freaking out and going any wich way on thier own, so i dissconnected them.
Found the electrical problem i had. The seat controller box on the 95 seats was fried. Enough to bubble out the plastic housing box melted plastic. Took it apart and its wasted inside. Multiple capacitor looking black pieces all fused together and bubbled over gell inside.
2 questions. Stuck an old 93 passengers controll box in my 95 drivers seat. Regained forward and back, but no tilt,up down or leanback from front drivers seat.
When i was trouble shooting, i hit the air up lumbar button and heard the blower AC motor start winding up. did it again and it went to blowing. So that tells me right there one of the wires has been shorted to something it shouldnt be touching along the way. Those are two entirely different circuits.
1. I need a pinout or schematic of the seat showing where it gets its power and ground from along the way to see if it shares anything with anything else. Im guessing the memory controller on the door.
2. Also, will the 2nd gen seats fit and or controllers work in the 1st gens?
About to find out. Gonna go pull a 97 seat out of the parts car and see if i can get it to move. Got the sidebar on pasengers side all welded in today, but couldnt do the drivers side because its tilted too far back and also too high. Have to be exact driving position with me in car to get te shoulder cross bar positioned right with me in the car. then get it tacked in there so its between shoulder and elbow in normal driving position.
Found the electrical problem i had. The seat controller box on the 95 seats was fried. Enough to bubble out the plastic housing box melted plastic. Took it apart and its wasted inside. Multiple capacitor looking black pieces all fused together and bubbled over gell inside.
2 questions. Stuck an old 93 passengers controll box in my 95 drivers seat. Regained forward and back, but no tilt,up down or leanback from front drivers seat.
When i was trouble shooting, i hit the air up lumbar button and heard the blower AC motor start winding up. did it again and it went to blowing. So that tells me right there one of the wires has been shorted to something it shouldnt be touching along the way. Those are two entirely different circuits.
1. I need a pinout or schematic of the seat showing where it gets its power and ground from along the way to see if it shares anything with anything else. Im guessing the memory controller on the door.
2. Also, will the 2nd gen seats fit and or controllers work in the 1st gens?
About to find out. Gonna go pull a 97 seat out of the parts car and see if i can get it to move. Got the sidebar on pasengers side all welded in today, but couldnt do the drivers side because its tilted too far back and also too high. Have to be exact driving position with me in car to get te shoulder cross bar positioned right with me in the car. then get it tacked in there so its between shoulder and elbow in normal driving position.
Last edited: