Search results

Pretty much what I figured as well...mislabeled or packaging. Thanks for the reply on the protective boot question.

I've owned the '94 from the beginning, so it has the stock steering rack shaft (the original). The Flaming River FR1715DD does not fit (splines don't align), even though it's the 3/4 DD 36 spline. I have a stock rag joint that's in fantastic new-like condition (feels like new), that I went ahead...

Hey Mike, Not sure that's the right product or fit for '94 Mark VIII. Tried putting it on and it is just not going on. Basically just rocks on top of the gear box post. The gear box post has a flat side on it about 1/4" wide, as does the old rag joint I took off. There are splines on the rest...

Hey Mike (tixer). Wow!! Thanks so much for the information. That was awesome. Great admiration for Ponyfreak as well. Hope I can return a favor some day. Good on you!!

Hey Folks, Trying to identify by number, the Flaming River Stainless Steel Steering Joint that works for the1994 Mark VIII. I need the joint, bolt for shaft attachment and set screw for gear box. Actually, I don't know where to get the bolt and set screw either . Can anyone identify the correct...

Hey, Need some general guidance on how difficult replacing an exhaust manifold and/or gasket is on '94 Mark VIII. Seeing a small amount of oil frequently where manifold and cat join (Driver's side). Any replacement info/experience would be greatly appreciated!!!

Thanks beerdog. Appreciate your reply.

Another quick question if you don't mind. Have seen a couple of possible applications where instead of the typical rag joint being installed as a replacement, a steering u-joint is installed along with what I believe is a 4" length of DD shaft drilled out to accommodate the steering shaft. Would...

Hey driller, Can't thank you enough for your quick reply. It was a welcomed answer. Hopefully the sliding shaft will cooperate. Good on you for your help.

Hey everyone, Trying to find someone who has replaced their steering shaft "Rag Joint" on a Mark VIII. I need to replace mine and it seems somewhat straight forward, however my question is as follows: Basically there are two bolts that have to be removed, one that secures the rag joint to the...