Search results

it is just a factory unit with new clutches in it and 4.10 with the control freaks differential cover and urethane bushings. I think you could do 1 7/8 medium length or long but it will be tough. I forgot how packed everything was . A tennis ball would not hall through from the top

I can have newer pic when I get it out of the car

The posi is a factory ford 8.8 . I don't remember where I bought the remote oil filter it is custom mounted to the crossmember just behind the radiator. uses FL1A Filter .The headers are 1 5/8"with 3"ball end collectors

Here ie a list of non-stock parts for sale Dual Line locks Dynotech Aluminum Drive shaft Drive shaft Loop Aluminum differential With Posi 4.10 Gears and Ccontrol Freaks diff cover with cap jacks Vortec Supercharger V1 S trim-complete kit innercooler, water to air, coolant tank, pump, aluminum...

WTS 93 Mark8 All or parts -I I am keeping the motor transmission and rear end. The car is black with black interior and sunroof. Paint on the car has failing clear coat. I am just starting the disassembly process. Let me know if there’s anything in particular that you need. Car is located in...

My car was originally equiped with one an the previous owner cut the wire and removed it. I got it back cd storage unit back but it is minus the harness. The radio doesnt work correctly is there a jumper near the amp to bypass the changer completely. or does any one have a dc harness.

I need another fuel pump mounting bracket for a 93 Mark VIII. I don't need the pump or the sending unit. I need it for multi in tank pumps. Building tri bump setup for E98. Keith

I am looking at a 1998 LSC. The initial asking price is $4500. It is a clean car with 70K miiles, A moms car. A CV joint is going and repairs are at a $1000. What would trade in value to a dealer be on the car? What is average price on a 98 LSC?

(2)Polished Stainless Magnaflow Mufflers New in Box part number 14336$100.00 Each 2.5"in and out Offset/Offset 14"long 20" OAL http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=579 Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

Cobra Brake parts for Sale -------------------------------------------------------------------------------- 2- 13" Cobra rotors new 2-Cobra Alu Front calipers new 2-Cobra Rear Calipers new 2-Cobra rear Rotors new 2 Cobra Rear Hubs New 2- Brake hoses NEW 2- Caliper Brackets BEW I bought...

Will a 4.6 block and a 3.9 block interchange? Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

I just took the plant tour http://www.edmunds.com/insideline/do/Features/articleId=107085# Click the "Take an Interactive Factory Tour" button. I want the fourth one from the left Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

What motor is in the LS? Is it a modular so I could put in a 4.6? Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

The new Cobalt SS and the Monte. Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

I am looking for another tranny. I came apon a 2000 with 18000 miles on it. Is $550 too much to pay. core is another $100. Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

I am in Phoenix AZ. area for a short stay. Can any one tell me where to go to find auto related activities? Cruise nights, drag races, swaps any thing. Keith Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

So Is there an easy way to test if the vent valve works. I just replaced the front air bags and now the car sits too high and I get a check air ride. Keith 93 BLACK 93 MAROON Only use the brakes to stop and get gas.

My black 93 just threw a error for the air ride it isn't lowering at speed. I would guess the vent valve is going bad. I did a search on the install of a Spider valve and didn't find much. I put an external vent valve on the maroon 93 for about $40 but it took me some time to fab the mounting...

Over the years I have manager to collect 3-460's and 2-429's all of the accessories were removed and stored away. I am in the process of installing one of the 460's in my 1978 F350 pickup and find that I am short some parts. Most likly because the alternators all went on other cars when somthing...

I did the fabricating and metal work on a 66 GTO that was stolen last weekend. Wednesday the owner was killed in a plane crash. The car was valued at $80,000 [www.66gto.net] That is the second high dollar car to be stolen in a year here in the Minneapois. Kinda makes you wonder! Keith 93 BLACK...