capping off front of the header(pump)

[Greenemachine]

where can I get a cap for the pump thats on the front of the headers? what size cap is it,, I know a few people have probally done this. thanks

 

[Mad1stGen]

RE: capping off front of the header(pump)

1/2" female pipe cap WATTS A-819 from your local HomeDepot.
I couldn't find anything to match even at a hydraulic parts store, but that SAE cap is just fine.

 

[Greenemachine]

RE: capping off front of the header(pump)

thanks, I'll go pick it up tommorrow.

 

[Greenemachine]

RE: capping off front of the header(pump)

did you have to use anything on there to get it to seal? I don't want it to leak.

 

[Eli]

RE: capping off front of the header(pump)

Cut off the stainless lines and weld them together. Thats what I did.

 

[Grifter]

RE: capping off front of the header(pump)

i bought the pipe cap from Home depot, and removed the pipe from the fitting that goes into the header, and left the fitting on the header, and welded the cap to the fitting..