How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

  • Total voters
    120
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

bring me your car and i will put headers on it. i will make them on the car for you, if you want i can also do a tubular k-member and some turbos as well.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

Dan, what kind of pricing would we be looking at if you did a GP? I am looking at bringing my car to these guys so they can figure out pricing and how long they will have my car, but if you think you could get a good deal goin' for us, please let me know.

The only thing that would make me nervous about doing this is using my car as a prototype, so I'd be without it for a few days...
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

well i have been selling these things for years and the fact that i work full time now for VRSexhaust.com taking orders and doing sales makes a GP even easier. i know i could have a aluminized system done this week and boxed up may be 10 or so maybe even 20. we have two mandrel benders. the normal system is 320 with x-pipe and i would need to know if you want a gp on ss and on the magnaflow muffler too. if you guys get more then 20 the price dopes even more.. if you only do like 10 it would not really be a gp but more of a end of winter sale. i think i can defintaly do a regular setup with no x for 250 may be a little less. this would be for a tubing kit meaning it would still need to welded and stuff. this is the best deal for you guys because you can mix and match the parts in the system.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

Give me a ball park on headers, two cats, xpipe, and install(got a set of mufflers I want to use) & I'll try & tape my credit card back together and be there this weekend.
Would like the turbo but the wife would have me sleeping in the car and it's pretty cold at night in FL past couple days.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

I and several others have Dan's kit and I can say it's worth it.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

I WILL WORK ON SOME NUMBER FOR YOU GUYS TO DAY BUT I NEED TO KNOW SOME NUMBER OF HOW MANY YOU WANT. HOW MANY IS WITH A SS MAGNAFLOW AND HOW MANY IN ALUMINIZED WITH A ALUMINIZED MAGNAFLOW. ALSO I WOULD NEED TO KNOW ANY IF ANY ONE WANTED THREE INCH PIPING.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

I don't think it would be tough to get 20 orders if the price is right. I still would like to figure out what this other guy is going to charge to do this. He needs to get my car in his shop and take a closer look at it though. From my understanding, his two biggest customers are Summit and Jegs. He said he would need at least 10 orders for sure. Like I said, I'm just doing a pole right now to make sure there is enough interest to get this through, otherwise he won't do it. This is all done on a CNC bender, so once it is programmed in, all we would have to do is call him up to have more bent up if needed.

Dan, how many would you need to do a GP, and could you possibly send me prices to compare with? I know a while ago you had sent me a price sheet to my office, but I have since gotten a new computer because my old one died. :(
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

WE HAVE TWO MANDREL BENDERS, ONE IS FULL CNC AND ONE MANUAL ONE FOR MAKING CUSTOM ONE OFF NONE IMPORTANT STUFF. MOST MINUMS ON GP ARE 20 ORDERS OR SO, I WILL GIVE YOU THE SALE PRICE ON ANY SYSTEMS YOU GUYS BUY FROM NOW FOR ABOUT A MONTH. THAT WAY IF YOU GUYS DONT HAVE ENOUGH, I WILL STILL GIVE YOU GUYS A SALE PRICE AROUND WHAT I SAID FOR ALUMINIZED. THE SS STUFF I WILL HAVE TO CHECK ON. WE DO ALOT OF PRIVATE LABLEING FOR COMPANIES AND WE CARRY A VERY LARGE SELECTION OF MUFFLERS SO I CAN GIVE YOU A GP ON MUFFLERS TOO.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

Thanks Dan. I should have some good numbers figured out by this weekend...I'll let you know more later.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

I am definitely in, but I am still waiting for Dan to fabricate more LT headers before I do the entire exhaust.

I think LT headers with hi-flow cats, a dual-in/dual-out edilbrock and 2 mufflers out the back will do the trick with the fabricated 2.5" mandrel pipes discussed above. However, the cats may not fit into this setup.

Dan...any timeframe on those headers??

I think the dual-in/dual-out will help dramatically over the single X-pipe when headers are used.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

i really like the torque i pick up with going to a 2 in 2 out magnaflow in the middle. the long tubes felt good but the middle muffler made it feel even better down low.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

dan i would like to have a 2.5 ss setup with the 2 in 2 out magnaflow in the middle like u have. im the guy in minnesota who recently bought your lt headers. let me know on the price and if u could get the muffler for me. thanks mike
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

That Edelbrock Stainless Steel 5512 is on clearance at SummitRacing for $88. Not too many left, or so it says.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

Just wanted to let you all know I am running this through Dan since the other shop backed out. He shot me a price on his standard SS exhaust with X pipe, but I can't remember what it was....I remember it being low though. Hopefully he'll have the rest of the numbers worked out Monday or Tuesday...I think he was trying to get muffler prices figured out for those that needed mufflers too.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

Any word on those LT's, Dan ?

Also, if I ran with the LT's, would it be better to use high flow cats + X pipe or no cats and 2 in 2 out resonator ? I have heard some fitment issues when running LT's with the cats.


http://www.msnusers.com/oiu8kagvsg38ahrcur19icl8v1/Documents/Pictures/stradog - sig..JPG

Jon Ike
95 MKVIII[font color="#CC0000"]
MIDWEST CHAPTER [/font]
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

i am working on price and avaliblility on the center ss magnaflow and i need to know how many people want them. i.e. who just wants a x pipe and who wants the center muffler and rear mufflers.
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

i need to get this exhaust asap. i would like to get the ss 2.5in with 2 in 2 out magnaflow muffler with it and to bolt up to art s headers. let me know when this thing happens 651 214 5313 mike
95 mark 8
current mods:
-3.73 track lok rear
-pullies
-msd wires
-cobra intake with imrc deletes
-white face gauges
-deleted rear mufflers
-y2k cobra r 17 with nitto 555s
-pa trans with full manual vb and transbrake
 
RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

RE: How many people would be interested in a GP of a 2.5" mandrel bent cat-back exhaust system?

the price on the mufflers would be 120 for the ss center one and 80 for the aluminized one. the rears should be 80 and 60 i belive.
 
You must log in or register to reply here.
Back
Top