Will a 1997 Mark VIII intake manifold fit on a 1995 Mark VIII engine?

dmkberger

Registered
Hey there wise folks of the Lincolns of Distinction, I am building a Restomod 1957 Ranchero and I have a 1995 Mark VIII drivetrain, 4.6L four cam engine with the AOD transmission and other pieces and parts along the electronics line.
I have a hard time with the 1995 intake and throttle body, it is WAY too low and REALLY far back on the intake. I have a nice gentleman who will sell me a 1997 Mark VIII intake, with all of the bits, injectors, EGR Tube, throttle cable and all of the necessary bits to make it work. My question is, Will this intake bolt to the '95 engine? I can fabricate a lot of stuff, but adaptor plates are out of my league and I'm just looking to make this engine as serviceable as possible once it's on the road.
I am NOT building a Hot Rod, I am building a modern take on the '57 Ranchero, I am using Lincoln emblems and hood ornament and have just decided to make it a 1957 Lincoln RanchCustom, I have the emblems made up that look factory, but I REALLY need to get the throttle body up where I can work with it and all of the electronics easier....
HELP an old guy out, if you know that this intake will fit or not, Let me know PLEASE!
Thanks in advance for your knowledge/advice in this matter
 
Well, I know you can bolt up an 96-98 Cobra intake to either the Gen 1 (95) or the Gen 2 (97), so I would extrapolate you can bolt the 97 intake to the 95 engine.

Not that I would. I would use a 96-98 Cobra intake. The throttle body location will be near the same as the 97.

IMG_7755.JPG
 
I have the intake and have it almost fully installed. I have a couple of questions that might just get answered here, I'm hoping!
The '95 Idle Air Control wiring will not fit the '95 and the Throttle Position Sensor wiring will not fit the '97. Anyone out there have the wiring diagram for the '97 IAC and the TPS?
I have the '95 Dealer Service Manuals and have all of the wiring figured out except the IAC and TPS for the '97.... HELP!!!!
 
I am not smart enough to post pictures... I'm old and do NOT know how this works... I can copy and paste with the best of 'em, but something about this will NOT allow me to post pictures...
 
Anyone out there have the wiring diagram for the '97 IAC and the TPS?
I have the '95 Dealer Service Manuals and have all of the wiring figured out except the IAC and TPS for the '97.... HELP!!!!
I think I have the '97 manual in the garage. I just returned from a weekend trip, so it will be a day or two before I can dig up the info.
 
I am not smart enough to post pictures... I'm old and do NOT know how this works... I can copy and paste with the best of 'em, but something about this will NOT allow me to post pictures...
Posting pictures is almost as easy as copy and paste... 🤭


Please be aware that as a registered user, you are limited in how you post attachments (pictures, or video) on the website. If you have pictures hosted on the internet somewhere else you may post a link to the pic.

Or if you are a paid member of the Lincolns of Distinction Car Club, you can post directly from your computer to the forums where your pics will be attached and permanently hosted on our website. This preserves website resources for for those who provide support for the costs of the website.

Link:
How to become a Paid Member

Alternatively, if you email the pics to me ( j_a_peters at Usa dot net ), I will be happy to upload them to this thread. 😉
 
Last edited:
Back
Top