Yay For Jesse
Yay For Jesse
LOL......I'm coming to the rescue here dude!(slowly but surely I'll get all my posts back!)
Hey guys, just wanted to post some pics to help anyone hoping to change their 02 sensors soon, it was pretty easy because I had the ease of having a lift. Also, don't overtighten the sensors when you install them because if you have to do it again you'll hate yourself.
Here is what I used to loosen them......
Flex Handle Ratchet and a 7/8" Crows Foot (or one that fits your O2)
For the Drivers side, basically put the Crows Foot on the ratchet as you see in above picture and "lay" the ratched on top of the catalytic converter and you will only get maybe 1/4 of a turn on the O2, move the crows foot and turn it again. It should now be loose enough to unplug and twist out by hand.
Now the passanger side is a little different, put an extention on the ratchet and you'll barely be able to get the Crows Foot on, but you should be able to loosen it. If not try turning over the Crows Foot. Make sure you unplug the O2 or it will be harder to get out because the wires will twist.
This pic is showing how I reached up over the passengerside "cat" to unscrew the O2.
Hope this helps someone. The car was "racked" and "un-racked" in less than 30 minutes.