4.10s are readyb to go

[D Day]

I picked up my differential today, the total came to $533 out the door, which included labor, 4.10's gears, lube and friction modifier and what ever else it needed. The guys said it was ready to install. I was thinking about installing it myself but I'm a little scared since I had such a hard time installing the ported intake a few weeks ago.

What speedo gear do I get and what else besides the 36mm nut do I need. If you guys have part numbers that would be GREAT.

When I finally install the new driveshaft will I have to take the differential out again? If I do I might hold off on installing the 410s and wait till I order the driveshaft.


http://memimage.cardomain.com/member_images/4/web/280000-280999/280293_34.jpg
[i/]______________________Mark of the Cobra______________________
94 Mark VIII
David J

 

[driller]

RE: 4.10s are readyb to go

[div class="dcquote"][strong]Quote[/strong]
...What speedo gear do I get ...
[/div]
http://www.transmissioncenter.net/23T.jpg
23 tooth AODE / 4R70W speedometer driven gears. For use with 4.10 gears in 7 tooth manual and automatic transmissions.
http://www.transmissioncenter.net/aode.htm

[div class="dcquote"][strong]Quote[/strong]
When I finally install the new driveshaft will I have to take the differential out again?
[/div]

Two choices. Lower the fuel tank and exhaust or unbolt the differential and lower it to allow the driveshaft to slide out above the differential.