jamies98lsc
Registered
no i didnt tear it apart!!! this is my buddies new mark. when he picked it up it wasnt too bad looking, but it did need help. i dont have any before pics i wish ii took some, but i had this in my shop for almost 2 weeks and alot of hours into it. i did all kinds of stuff to it, heres a list...
entire front suspension rebuild, uppers, lowers, end links, inner and outer tie rods, strut rod bushings, one front strut, oil change, tranny service with a flush and fill with merc 5, modified the intake tube, took off the dented early 93 tube and put on a later tube, cut off and molded over the air silencers on the tube, sanded and painted it, put on a beauty cover ( original missing ) changed the antenna, changed the rear shocks to sensatracks with new solid mounts, put in factory 94 style woodgrain ashtray/ cup holder and shifter and eatc bezel, changed eatc to 95 hard button, removed all interior trim pieces, removed sticky rubber coating, wet sanded them all down with 1000grit to get the factory satin look, not too shiny, not too dull, fixed the console arm rest lid, removed all the seats and cleaned them with a magic eraser, conditioned all with lexol, shampoo'd the rug, fixed some scratches on the body, then i clay bar'd it and waxed it then i put on a coat of polish. cleaned the wheels and shined up the tires. lots of hours went into this baby! he just had it aligned too now we have one problem with the abs to solve. this thing looks incredible. check it out.
entire front suspension rebuild, uppers, lowers, end links, inner and outer tie rods, strut rod bushings, one front strut, oil change, tranny service with a flush and fill with merc 5, modified the intake tube, took off the dented early 93 tube and put on a later tube, cut off and molded over the air silencers on the tube, sanded and painted it, put on a beauty cover ( original missing ) changed the antenna, changed the rear shocks to sensatracks with new solid mounts, put in factory 94 style woodgrain ashtray/ cup holder and shifter and eatc bezel, changed eatc to 95 hard button, removed all interior trim pieces, removed sticky rubber coating, wet sanded them all down with 1000grit to get the factory satin look, not too shiny, not too dull, fixed the console arm rest lid, removed all the seats and cleaned them with a magic eraser, conditioned all with lexol, shampoo'd the rug, fixed some scratches on the body, then i clay bar'd it and waxed it then i put on a coat of polish. cleaned the wheels and shined up the tires. lots of hours went into this baby! he just had it aligned too now we have one problem with the abs to solve. this thing looks incredible. check it out.