sleeper
Former LOD President
I could try, but i'm hesitant to fill it up until i'm ABSOLUTELY SURE I won't have to drop it again. First time I dropped it it was full. Filled it to 1/4 tank to test and it made it much easier to drop the tank yesterday.
I also tried running it with the gas cap off to see if it was an issue of vacuum in the tank. Didn't fix it.
Based on internet searches, all that's left is electrical problem or crimped feed line. Feed line looks good all the way, filter is new, and I wouldn think a restricted line would cause the problem full time, not intermittantly like it is now.
I'll throw a relay at it and try to check some of the wiring out. Problem is that to really check the wiring I either have to drop the tank again or cut the hole in the floorboard that I should have cut in the first place.
I also tried running it with the gas cap off to see if it was an issue of vacuum in the tank. Didn't fix it.
Based on internet searches, all that's left is electrical problem or crimped feed line. Feed line looks good all the way, filter is new, and I wouldn think a restricted line would cause the problem full time, not intermittantly like it is now.
I'll throw a relay at it and try to check some of the wiring out. Problem is that to really check the wiring I either have to drop the tank again or cut the hole in the floorboard that I should have cut in the first place.