J
joeychgo
Guest
No check engine light, but code 632 coming up. Anyone know anything about this code?
RE: Code 632
According to AllData,
DTC 632 indicates the Transmission Control Switch(TCS) was not cycled between engine "ID Code" and the "Goose Test" in Key On Engine Running Self Test.
Possible causes:
-TCS damaged or switch not cycled during Self Test
-Shorted harness
-Damaged Powertrain Control Module
-Open harness or fuse
Is the O/D switch working as it should?
According to AllData,
DTC 632 indicates the Transmission Control Switch(TCS) was not cycled between engine "ID Code" and the "Goose Test" in Key On Engine Running Self Test.
Possible causes:
-TCS damaged or switch not cycled during Self Test
-Shorted harness
-Damaged Powertrain Control Module
-Open harness or fuse
Is the O/D switch working as it should?
RE: Code 632
632 - Transmission Control Switch circuit did not change states during KOER self-test.
When you usually do a code scan with the engine running, you are supposed to hit the O/D cancel switch to turn it on and off, and when you don't that code usually comes up. If you never did a KOER test, then I have no idea.
632 - Transmission Control Switch circuit did not change states during KOER self-test.
When you usually do a code scan with the engine running, you are supposed to hit the O/D cancel switch to turn it on and off, and when you don't that code usually comes up. If you never did a KOER test, then I have no idea.
J
joeychgo
Guest
RE: Code 632
Kool, I think I know what the problem is then. When I changed my gearshift it gave me alot of trouble. I finally got it on by the od button didnt work. I never turn it off anyway so I left it alone. I guess I gotta go back and do it right. Thanks alot
Kool, I think I know what the problem is then. When I changed my gearshift it gave me alot of trouble. I finally got it on by the od button didnt work. I never turn it off anyway so I left it alone. I guess I gotta go back and do it right. Thanks alot