Components Identification

J

JERM

Registered
I dont know if this thread is in the right area but here it goes. I took the amp tray down in my 93 Mark, and i was horrified at what i found. I found that the previous owner hacked up wiring for the stock amp. I will not be needing the stock amp, or tray so i removed it. I found a few componets that i cannot identify and i was wondering if someone on here can(Jamie, lol). I know one of them is the compass, but what are the others? Can you name them from left to right?
P1070485.jpg

Here is some of the wiring i found.....
P1070486.jpg


Thanks for any and all help!!
 
Cell phone transceiver, compass module, hard ride relay, soft ride relay, shock damping module. ;)
 
steve said:
Butterfly opening Multi-Plier and duct tape :D
Click to expand...
HAHA, 2 of the best tools ever made!!! You guys missed the collapsible 4 way under the plywood, lol. Thanks for the help guys.

I did a coil conversion, and i plan on changing the rear shock with non adjustable. Can i get rid of the hard ride relay, soft ride relay, and shock damping module? Should i cut them out to save weight? Or just tuck the wiring away somewhere? I took out the amp rack to make room for the sub box i am putting in there and need to relocate the compass module at least.
 
Last edited:
JERM said:
Can i get rid of the hard ride relay, soft ride relay, and shock damping module? Should i cut them out to save weight? Or just tuck the wiring away somewhere?
Click to expand...

When I replaced my shocks, I unplugged the actuators for the shock(s) at the harness connector(s). I left the relays and controller but you could unplug them as well and loose the weight for what it's worth. Of course the same goes for the cell phone transceiver.
 
You must log in or register to reply here.
Back
Top