continental_guy
Registered
If anyone is looking for replacement brakes, I'd highly recommend the Brembo rotors and Akebono pads.
Some tips: Be sure to buy the tool for the rear calipers. I'd be SOL without it. Make sure you have both the red and blue thread lock compound on hand; I wouldn't feel good about bolting up the caliper brackets or caliper locating pins without it. It took me (Mr. Endless) about 15 hours over two nights to complete replacing all four rotors and pads to my satisfaction.
I try not to compromise when it comes to working on brakes.
{Derived from post on reverse noise).
Some tips: Be sure to buy the tool for the rear calipers. I'd be SOL without it. Make sure you have both the red and blue thread lock compound on hand; I wouldn't feel good about bolting up the caliper brackets or caliper locating pins without it. It took me (Mr. Endless) about 15 hours over two nights to complete replacing all four rotors and pads to my satisfaction.
I try not to compromise when it comes to working on brakes.
{Derived from post on reverse noise).
