Cruise control wiring

[French_Mark 8]

Hi

I have lost the cruise, and on my tech book, there is a lot a wiring schemes, but not the cruise's.
I hope to know on what fuse it is, because all in the 2 boxes are good, and test the steering's push buttons before exchange the module. I saw here there is a possible problem on the buttons.

thank you

 

[driller]

Try looking under speed control.

 

[French_Mark 8]

I have nothing about cruise or speed control on my schemes. I see only the speed sensor connected to main computer

 

[billcu]

Does your horn work? Does your airbag (SRS) light blink?

The reason that I ask this is, these functions, as well as cruise control, use the clockspring in the steering column. If the clockspring is broke one or more of these functions will be affected.

 

[French_Mark 8]

Everything is good, no strange noise in the steering wheel.

I have found a test procedure in a old post, but it as about a '98
Is it the same on '95?
I will test that this we I think, I'll see

 

[budpytko]

Broken clockspring will NOT make any weird noises, just certain things will not work correctly....reread billcu's post above.

 

[driller]

I have nothing about cruise or speed control on my schemes. I see only the speed sensor connected to main computer

Perhaps this will help.

 

[French_Mark 8]

It is exactly what I need, thank you. :big-grin: I can test everything and write here what was the defect

 

[Lonnie]

I just got a recall on my 95 for possible fire caused by the CC wiring. Haven't taken it in yet to find out what exactly they the do to fix this. It just says the speed control deactivation switch and fused wiring harness are the problem. The parts won't be available until 4th quarter this year and to not use my CC until it's taken care of.