FS: Gen 2 HID Aftermarket Upgrade Adapters

DLF said:
That's not the issue.

The issue is the diameter of the existing hole in the housing vs. the diameter of the o-ring on the bulb base.
Click to expand...

I had that problem too...though the bulb seems to fit in there pretty tight when I removed the o-ring.

Think running without the o-ring is okay?
 
logres said:
I had that problem too...though the bulb seems to fit in there pretty tight when I removed the o-ring.

Think running without the o-ring is okay?
Click to expand...

Which bulb did you use? The 9005's were loose, not tight.

As long as the outer housing is sealed, it shouldn't be a problem.
 
DLF said:
Which bulb did you use? The 9005's were loose, not tight.

As long as the outer housing is sealed, it shouldn't be a problem.
Click to expand...

I use 9005's.

The bulbs went in loose, but when I turned them to lock them in, they got tight.
 
Made up another batch. Get 'em while they're hot! :cool:
 

Attachments

  • HPIM1264.jpg
    HPIM1264.jpg
    46.6 KB · Views: 0
Made a couple of more sets today. This is it until I get some more material.
 

Attachments

  • HPIM1490.jpg
    HPIM1490.jpg
    70 KB · Views: 0
Would you be so kind as to hold a set for me, and some of those brake relocation things also... :D

how much are the brake things again?
 
BadSax said:
Would you be so kind as to hold a set for me, and some of those brake relocation things also... :D

how much are the brake things again?
Click to expand...

The HID adapters are always in stock. ;)

I don't make the rear brake relocation brackets. A friend does, using my design. Look HERE.
 
Dent and Scratch Sale!

Dent and Scratch Sale!

I have one pair of adapters that have some scratches on the face. They'll work fine, they're just not as pretty as all of the other sets that I've made.

$5 off, $50 shipped (lower 48).
 

Attachments

  • HPIM1932.jpg
    HPIM1932.jpg
    116.9 KB · Views: 0
You must log in or register to reply here.
Back
Top