I wanna get this gone. I can get shipping very resonably and quickly as I have a DHL account. Local pickup is fine, but generally, shipping is cheaper than gas.
1) Solid Motor Mounts for a 302 in a fox brand new $25
2) Alumnium Drive Shaft from a Crown Vic (can be shortened for a fox) $50
3) 1991 Crown Vic 302 Motor. Long block w/o dist. 82K Grandpa miles on it. $150 w/o Intake (below) $300 with it. *Sale pending*
4) Ported Aluminum Offenhauser Port O SOnic 302/289 Intake. Has minor port work. In a comparitive test it made the most HP and TQ of all the common intakes. $200
5) Under Drive Water Pump Pulley for 4.6L DOHC (May fit other mod motors) $20
6) RHB5 Turbo w/ Probe Exhuast Manifold attached. Cam off a car with a dead dictributor. Still has lines attached (cut though) Very Little Shaft Play, in good shape. Turbo is complete w/wastegate. Same as item # 160004752368 on ebay except without the rubber hoses. $150
7) Probe Intercooler $15
8 ) Hypertech 93-98 4.6 DOHC (may fit others) Underdrive Pullies (Crank, alternator, water pump) #3086. Used but includes the $143 Recipt and are in box. Gained .43 Seconds on a lighting and .23 on an 89 5speed Mustang. $70
9) 3.3" 6rib Vortech Pulley. $60
10) Std. Bore TRW Forged 302 Pistons on C8OE rods w/o end caps. $75 ($40 if you buy the motor with them if the current buyer falls through)
11) Gray Door Handle off of a 1985 LX $5
12) Gray Glove Compartment off of a 1985 Fox $5
13) 4 16 x 7 Lincoln Mark VIII "Snowflake" Wheels w/ Good Tires have at least 20K+ left on them. 5x4.25 Bolt Pattern (Fits Volvos,Jags,Lincolns,Tauruses and Ferraris) $250
14) 2 15 x 7 Ranger Wheels Freshly Painted, look decent great for slicks $80 5x4.5 bolt pattern (fits just about everything)
I would also be interested in trades for
1) Skinny tires (135/15, at least S (112mph) speed rated),
2) A decent size, reliable, air compressor
3) Modular parts, pistons, rods, cams, cam covers, etc.
4) Bulilt trans, trans parts, torque converter, etc (4R70W/AOD-E Only)
1) Solid Motor Mounts for a 302 in a fox brand new $25
2) Alumnium Drive Shaft from a Crown Vic (can be shortened for a fox) $50
3) 1991 Crown Vic 302 Motor. Long block w/o dist. 82K Grandpa miles on it. $150 w/o Intake (below) $300 with it. *Sale pending*
4) Ported Aluminum Offenhauser Port O SOnic 302/289 Intake. Has minor port work. In a comparitive test it made the most HP and TQ of all the common intakes. $200
5) Under Drive Water Pump Pulley for 4.6L DOHC (May fit other mod motors) $20
6) RHB5 Turbo w/ Probe Exhuast Manifold attached. Cam off a car with a dead dictributor. Still has lines attached (cut though) Very Little Shaft Play, in good shape. Turbo is complete w/wastegate. Same as item # 160004752368 on ebay except without the rubber hoses. $150
7) Probe Intercooler $15
8 ) Hypertech 93-98 4.6 DOHC (may fit others) Underdrive Pullies (Crank, alternator, water pump) #3086. Used but includes the $143 Recipt and are in box. Gained .43 Seconds on a lighting and .23 on an 89 5speed Mustang. $70
9) 3.3" 6rib Vortech Pulley. $60
10) Std. Bore TRW Forged 302 Pistons on C8OE rods w/o end caps. $75 ($40 if you buy the motor with them if the current buyer falls through)
11) Gray Door Handle off of a 1985 LX $5
12) Gray Glove Compartment off of a 1985 Fox $5
13) 4 16 x 7 Lincoln Mark VIII "Snowflake" Wheels w/ Good Tires have at least 20K+ left on them. 5x4.25 Bolt Pattern (Fits Volvos,Jags,Lincolns,Tauruses and Ferraris) $250
14) 2 15 x 7 Ranger Wheels Freshly Painted, look decent great for slicks $80 5x4.5 bolt pattern (fits just about everything)
I would also be interested in trades for
1) Skinny tires (135/15, at least S (112mph) speed rated),
2) A decent size, reliable, air compressor
3) Modular parts, pistons, rods, cams, cam covers, etc.
4) Bulilt trans, trans parts, torque converter, etc (4R70W/AOD-E Only)