RE: Help, can't get tranny out
yea I took out the starter already and I did not take out the gas tank but I did tilt it down in the front. I am going to put 4.10's and a traclock in the pumkin, should I just remove the pumkin and the driveshaft together. Then I would not have to drop the tank, right?
P.S. are there just the 4 bolts holding it in there, and if you undo those bolts will the half-shafts fall out with it.
Ahh man... You are going ot have to take that driveshaft out to get the tranny out. Taking hte pumpkin out is a lot more work than the gas tank. To take the pumpkin out you have to take one of the rear tires take a whole bunch of crap off to get the halfshaft out, then undo the bolts on the pumpkin, tehn take it off. then you can slide the driveshaft out. YOu have a lot of work ahead of you. But you are going ot have to take that driveshaft out someway. YOu have to move the tranny back about 10" or so towards the rear of the car to get it to clear the convertor and stuff. Good luck, you have a lot of work ahead of you.