Of the choices linked in the first post, I like the Zinik best.
Overall, I like the Bullitt, or as I bought, Saleen Speedstar replicas:
The black fr500 on the black mark look awesome too!
If the black FR500s had chrome lips, that would be the BadSaxillac wheel of choice.
If the black FR500s had chrome lips, that would be the BadSaxillac wheel of choice.
Mine are the black chrome FR500's.....a little different.
Are these 30mm/40mm offset or 36mm/45mm ?
Thanks !
The only things left are to roll the fenders (tires rub on big bumps), and cut the axle shaft stubs so the caps fit. Got any recommendations on cutting the shafts?
There's a customizing shop here in town that'll do it for $65 so I may go with them.
These are the 30/40mm ones. After all those millions of questions I asked you months ago, this is what I decided on. 18's, 9in front, 10in rear, 255's on the front, 285's on the rear. The e-brake cable rubbed on the rims on both sides, but I wired them to the sway bar, so it's all good now. The only things left are to roll the fenders (tires rub on big bumps), and cut the axle shaft stubs so the caps fit. Got any recommendations on cutting the shafts?
I think they stick out too far for even the domed center caps. Driller, do you think I could get away with painting the chrome part of your caps black so they don't look weird with mine?