Supercharge question

T

Tylerw1

Registered
I am thinking of putting a supercharger n my 98 mark I was just wondering where I could find one first off. If any one nows like a site or anything that would be good. Would can send me an email or just respond back.

Email: tylerdwinslow@yahoo.com
 
RE: Supercharge question

[div class="dcquote"][strong]Quote[/strong]
I am thinking of putting a supercharger n my 98 mark I was just wondering where I could find one first off. If any one nows like a site or anything that would be good. Would can send me an email or just respond back.Email: tylerdwinslow@yahoo.com
[/div]

Assuming the search function is still screwy, the only direct bolt-on kit for our cars is the Vortech supercharger...that I know of.

With some finagling (technical term), you can get the Kenne Bell 1.6 to work on our cars, though you would need to buy a new hood.

All other blowers would need some machining and/or special parts to work.

Someone on here bolted on a Kenne Bell 2.2, but it cost him 17 grand in parts alone.
 
RE: Supercharge question

All superchargers for our cars need some kind of fitment, fuel supply mods, intake modifications,and electrical work (re-wiring, chips etc). There are for the Gen2 no easy kit that bolts on only. You have 2 choices for Super chargers. The centrifical type or the twin screw/roots type. Do some research at sites like Kenne Bell, Votec,Pro Charger, Allen, and Whipple to help get yourself acclimated to their benefits. As stated above I did spend the dollars in patrs etc, but I got a completely built drive train tuned for the 2.2L Kenne Bell setup. I got it all in one shot. Al though you have a Gen 2 I believe we will soon here from one of our members that he managed to squeaze a KB under a stock Gen 2 hood with a few simple mods to the hood. I went with the Cobra hood for clearance.:9
 
RE: Supercharge question

99 cobra s-trim kit is a direct bolt on for any 2nd gen mark viii. It's no secret.
96-98 kits work as well but require a 96-98 cobra intake or 99 cobra vortech piping to match up with the TB.

(Read on another site today)
 
RE: Supercharge question

[div class="dcquote"][strong]Quote[/strong]
99 cobra s-trim kit is a direct bolt on for any 2nd gen mark viii. It's no secret.96-98 kits work as well but require a 96-98 cobra intake or 99 cobra vortech piping to match up with the TB.(Read on another site today)
[/div]

For your info Tylerw1: The kits mentioned above are Vortech.
 
RE: Supercharge question

good thing my 97 cobra intake is on its way to fox lake for porting and matching. next will be the 97 vortech kit
 
You must log in or register to reply here.
Back
Top