RE: Wipers wont park Gen 2
Basically, you still need to remove all the bolts holding the tray in place. But rather than trying to pull the tray out at that point, you just lift and tilt it up enough to where you can unplug the motor's electrical connector (probably the most difficult part of the whole thing, which isn't much). Then remove the bolts holding the motor to the tray and wiggle the motor out from under it. MUCH easier than removing the tray completely.
Cuts hours of frustration trying to get the tray back in place.
Basically, you still need to remove all the bolts holding the tray in place. But rather than trying to pull the tray out at that point, you just lift and tilt it up enough to where you can unplug the motor's electrical connector (probably the most difficult part of the whole thing, which isn't much). Then remove the bolts holding the motor to the tray and wiggle the motor out from under it. MUCH easier than removing the tray completely.
Cuts hours of frustration trying to get the tray back in place.