Recent content by Jker

I knew I would do this. Think of another question after I hit "submit"..... What about the shocks / strut combo. Are they included with the kit? I just put new factory shocks on the rear not more than 5,000 miles ago, with new mounts..... I guess I can replace the struts in the kit with...

Hey guys. Thinking of doing the spring conversion, and I have some questions. 1. Tire rub. With the 1.5 lowing springs, and the stock tires, is there any rubbing lock to lock, or in the rear, with weight in the trunk, going over bumps, is there any rub there? 2. Suspension electronics. Has...

Well. Good news, bad news. Bad news first. The 2-3 shift wasn't late. It was missing!!!:o :o So, I droped the pan, valve body, etc. and the friggin 2-3 accumulator retainer fell out!!! I had put it in backwards, like a complete idiot. So, I had these parts new from ford, so I replaced them...

Thanks Driller. What gear would I need? It's a 2K stang trans, with the 8 tooth output shaft gear. Do they even have a gear for the 3.08 rear?

Ok, I'm all done. I put a 2000 Mustang GT trans in 93. I jmod-ed it, removed the spring from the 2-3 accumulator, and the lower from the 1-2 accumulator. I drilled the valve body for the 300 to 450 setting. I installed a Mach 1 torque converter. I used a new tcc for my 93 in this trans after...

Quote Here's some videos on our tranny, disassembly and assembly, including the output...

Thanks. I'll leave the struts bolted in up top, and just un bolt them from the lower control arm. Didn't get around to droping the K Member last night. I tore the rear out instead, to get it ready for my trac loc and 4:10's. The search continues for a suitable tranny. I'd rather not rip into a...

I'm interested in the Trans. Let me know what you want for it.

Well, output shafts are swapped from the front, meaning the pump, and all the clutch packs, OD Band, OD Server, the valve body needs to come down also, that's all i can remember so far....All that stuff needs to come out, THEN you can get the output shaft out. Re-assemble in reverse order. But...

That's what I was wondering about. Whether or not there even was a spot for a speedcal to be placed. I R-E-A-L-L-Y do NOT want to tear into a 2K3 tranny to swap output shafts. Is there another alternative, or should I just say Forget about it, and get a pre 2k3 trans. Opinions?

Hey guys. Long time.... I searched around but I still have a question. My 93 ate the direct clutch in the tranny. Rather than rebuild, I'd like to replace. I have a line on a 2003 'Stang trans, but I did come accross a notation about the VSS. IF the 2K3 trans has no provisions for a VSS, what...

Ponyfreak, you have a PM. I'd like to add 1 "lacy spoke rim" that came factory on the 93's. Thanks.

Payment sent. see e-mail for details....

E-mail sent. Back off petey, she's mine!::wtf:: :):) :) :+

I saw your message, and I sent a response, but if you didn't get it, let me know. Thanks John