wheel and tire size
i've got 10" rims with a 50 offset. 275/40/18 fit inside with plenty of room if you roll the fenders. i think 285s would fit ok also. i had 295/30s on for a while they stuck out a bit and i had to tie emerg brake line back with plastic ties. the 50 offset is a ferarri...
i've heard 98 mark 8 hood is made of aluminum,fiberglass or sheet metal, could someone tell me for sure. i'm thinking some kind of functional heat extractors. not having excessive heat problems but a fool needs to be cool. thanks
tire hght
guess i'll let u all know how it turns out. i read a number of mustang forums claiming 400 to 550 rwhp hooking up fine wirh 15lbs and a good burnout. with 5 and 6 spds. nitto is backordered on the nto5r drag radials right now. i.m going to install the 8.5 pulley,redyno and turn it...
18x10
i found a body shop that would rent me a fender roller,bought a cheap heat gun at harbor freight,took me about 1.5 hr. to do both no problems. get your stuff call me i,ll walk u thru it. easy i,mNOT mech. inclined i made it ok
27
will need to roll fenders a little or raise some, sure u don't want to raise it with that tall of a tire. i rolled fenders, not hard.and u can go wider in the future. i had 275/40/19 on rear stock offset. 27.7 high
what i'd like is bluetooth,cd/dvd with screen,hd fm. whats the best bang for the buck that will fit. don't know if i need or want to change speakers or factory amp any advice appreciated.
18x10
i,ve got 18/10 on rear 295/30 tires,had to roll fenders. that is a 50 offset,wheel is 5x108 ferarri after market. i've got a set of 19s i'll sell
tire hgt
5750 shift point was set while on dyno,i was wanting rwhp under 450. 438 at 5750 is what we ended up with using 6.5 lb pulley. when i switch to a 8.5 pulley it will make more hp than the engine can stand over 6000 rpm. i.m not trying to make all the hp possible so much as making all...