Search results

Have a Question about a Torque Converter. My transmition started slipping the friday before Christmas. I've been working out of town a lot so It's been used only a few times since then. I have the trans torn down now and getting ready to put it together this weekend. I have been thinking...

You people may already know this but if you don't!!! One way glass is one way only in that you see from the side that is not as well lighted to the dark side. What happens in this case if a dark cloud or something makes a large light change, suddenly you can't see out and guess what ???? Wayne

I have though about one of the louvers. My thing is I haven't used it in over a year and now with the new motor it still doesnt work right so I unhooked the power lead. I'm thinking just seal it. that wouldn't show or make any noise. I also thought about a piece of foam stuck up in there and...

Am I the only one who Hates these things? I don't know of anyone who has one that doesn't have wind noise. I bought a new seal about a year ago, over a hundred dollars, and you could have dropped a dime right through in every corner. The factory knows they are going to leak, If anyone out...

My Youngest Son Bought A Mach I last year. It is really a fun car with a 5 speed. I take it for a drive every once in a while. I have thought about getting one of those engines when Mine gives up also. I'm up to 202 thousand now. It runs so good though I'm thinking I have about a 100...

Has Anyone ever had thier rear window out and knows how the rubber trim we have all been upset with is shaped. There is a site I found in one of our publications at work that said it made rubber trim. Check it out at http://www.stanpro.com . Look under "self sealing weatherstrip" Or...

I know None of you know me well enough to know this yet so I'll explain. I have been single for the last 25 years and one of my brothers for 20 years. For the last 8 years we have shared a house. You should be able to tell it's a bachlor pad when you see 2 Boats, a 2002 superduty ford 3/4...

It was fun. I enjoy meeting new people. Hope to do it again. Maybe a nice warm summer day next time. Wayne

OK people. I was really thinking of trying to get to see some of you this sunday. However, it is about 5 hours to get there by the time I find the place and 4 hours at least, back home. I would hate to get there and find it had moved. I am not sure I'll make it but I'm going to try. I'll...

You Can get them that just heat and don't dim. That's what I did on my 94, and just taped up the other two wires. Way, Way Cheeper. Wayne

I really don't think I'd worry about the moisture. On a Mustang 4 cyl. I had I used water injection to keep the intake charge cool and ran 17 lbs of boost with no ignition retard and got no knock. It did take only 4 quarter mile runs to use 1 quart of water. That's 1 cup in 14 seconds. I did...

I don't know if your problem is the same but mine quit a couple weeks ago after a couple really hot days. I took the instrument cluster out and found the sealer under the tach face had softened and let it slide down enough to ride the shaft to the needle and bind it. I just carefully lifted...

I did not find it hard at all. I thought the hardest thing was getting it up in the air and blocked where I had enough room to work. However, This was my first one with electric controls so I kept a real close track of any wires I took off. I had a shop and did auto work 25 years ago...

I did the B+M in Mine. I bought the stuff for the shift fix from ford only to find out the B+M kit has it in there. Same parts I got from ford, Spring and all. My frindly dealer took them back so I saved That Money. The Kit has a couple stages and I did the the hardest shifting one. I don't...

My first bike was a KZ900, a very fast bike in the 70's. I know it would hit 115 in third gear, I tried it once and never again. It had 5 gears and I have no idea of it's top speed in 5th. Then I had a GL 1000, the first of the Honda gold wings and I have no Idea how fast it would go. I now...

Yes, I do see Blue Coral products but never that 2 part system with the hard wax. I don't know if the new stuff would be as good. They do have something called Dry Clean for fabric cleaning that I use. I put a guage in my 84 Cougar, one with a line, it broke and engine oil all over the...

I don't know if it's still made or if it would be good for the new clearcoat finishes but!!! When I got my first good car, a 1959 Bonniville, Black, I had something made by BLUE CORAL. It was a 2 Part thing. One jar of a cleaner to use first, then another jar of was I guess was Wax. It looked...

Don't Know for sure about yours but mine started just dropping down to 2nd while I was driving and then might come back up on it's own. Sometimes I'd Have to wiggle the shifter a little and it would come back. I changed what I think They call the MLS, it's the electronic switch right on the...

I would suggest you feel around the front tire. If you feel a slight cupping on the inner or outter edge it might be tire noise. I've had that before and changed the tires and it was gone. The cupping doesn't always go all the way around and will give you the sound of a bearing. Just my $.02...

I Would be very careful running without a thermostat. I have heard the colant can pass through the radiator to fast and not give up enought heat. Don't know that for sure. If it runs hot without one, that may be why. Wayne