Well I'm going to be using an 03 85mm GT MAF on my upcoming dyno tune. Here what you need to do the swap and use a K&N conical filter.
the 02 GT MAF ford part #YC2Z-12B579-BARM $99.95 + $75 core charge from five star ford
If you go to corral.net or any other mustang forum you can find people to sell you their stock unit for well under $100, for mine for $60
This MAF has a 6 pin connector, out cars have a 4 pin harness. You need a wiring harness adapter to just plug this MAF in, or you can solder the wires. I believe the outer two wires on the GT maf are for the IAT that is built into the GT MAF. But since our IAT is seperate we don't need this.
Wiring harness: F68Z-12A690-AA $17.xx from five star ford
To use a conical filter you also need an adapter that can be bought from pro-m . Although it says it's for an 80/90mm unit, the 85mm GT maf will bolt up to it no problem. I was told this on the modular depot form "It is exactly the same MAF housing as the 99-00 80MM Lightning" When I called pro-m and asked they said it would be no problem with an 03 GT. So I am not expecting any problems.
plastic adapter $27 http://63.103.83.92/detail.asp?id=226
metal adatper $36 http://63.103.83.92/detail.asp?id=225
Keep in mind you need a chip or a dyno tune to do this mod! The transfer function is differnt and your car won't run right. Dennis and the SCT guys reccomend the 02 GT maf....do a search for Dennis' write up about it.
If I have any wrong into here let me know!!!
the 02 GT MAF ford part #YC2Z-12B579-BARM $99.95 + $75 core charge from five star ford
If you go to corral.net or any other mustang forum you can find people to sell you their stock unit for well under $100, for mine for $60
This MAF has a 6 pin connector, out cars have a 4 pin harness. You need a wiring harness adapter to just plug this MAF in, or you can solder the wires. I believe the outer two wires on the GT maf are for the IAT that is built into the GT MAF. But since our IAT is seperate we don't need this.
Wiring harness: F68Z-12A690-AA $17.xx from five star ford
To use a conical filter you also need an adapter that can be bought from pro-m . Although it says it's for an 80/90mm unit, the 85mm GT maf will bolt up to it no problem. I was told this on the modular depot form "It is exactly the same MAF housing as the 99-00 80MM Lightning" When I called pro-m and asked they said it would be no problem with an 03 GT. So I am not expecting any problems.
plastic adapter $27 http://63.103.83.92/detail.asp?id=226
metal adatper $36 http://63.103.83.92/detail.asp?id=225
Keep in mind you need a chip or a dyno tune to do this mod! The transfer function is differnt and your car won't run right. Dennis and the SCT guys reccomend the 02 GT maf....do a search for Dennis' write up about it.
If I have any wrong into here let me know!!!