Search results

  1. B

    Door Handle Gaskets

    Is this a discontinued part?
  2. B

    Gen 2 painted headlights

    nice. Do the lights still reflect good?
  3. B

    strut rod sleeves

    Did you try messaging him?
  4. B

    strut rod sleeves

    They ar eworth it. When you could buy the strut rod bushings as a kit with the bushings and hardware they were crazy expensive. Like 100 plus per side.
  5. B

    strut rod sleeves

    These were originally a Doug creation (DLF RIP). Jay bought his machines, parts, and designs.
  6. B

    Question about Mark VIII Longevity

    I think you can find replacements for everything on the used market. Just have to start paying attention to the forums, Ebay, and FB to buy up good spares. Gen 2 rear neons are always tough to come by. My experience is that all the mechanical stuff is easily replaced.
  7. B

    Battery Time

    A cup is a lot. You should get it tested on a good battery tester or diagnostic charger.
  8. B

    Battery Time

    All the "brands" are basically the same. There are slight differences in the internal design of the plates, the amount of lead, etc. You do get what you pay for. Paying extra for an AGM or Gel is pretty much as waste of money for a daily driver. The big factors in how long a battery lasts is...
  9. B

    Oil Filter Help

    As long as you tighten by hand you almost never need a wrench to loosen and oil filter.
  10. B

    Oil Filter Help

    So if some knuckle head forces a FL1A onto to the stud would the threads get messed up? I would think the filter would be damaged before the stud.
  11. B

    Battery Time

    Walmart's batteries are made by JCI.
  12. B

    Motor Mount

    SCP was selling abasic poly mount, but I think a NOS OEM is better. It looks like he is selling a new style mount . https://www.supercoupeperformance.com/beefy-poly-v8-motor-mounts-fits-2v-or-4v-46l-v8-applications-928 There was a company making a racing style solid mount. I recal them being...
  13. B

    removing air injection?

    If your state does emissions testing you may trouble passing. Why do you want to remove it?
  14. B

    Induction Heating

    Another one. I guess these are more common than thought. https://www.youtube.com/watch?v=gFh8Pci5gpc
  15. B

    Induction Heating

    This video is good. I love is description of how it is like a microwave but it is not. This one is specifically for rusted bolts. This video ironically came on YouTube as the next video. https://www.youtube.com/watch?v=bJKbwBQRFsc I have done some work with induction heat treating over the...
  16. B

    Air Ride Problem ?

    You can also install an override switch system like ASHAM8. Same people have fabricated their.
  17. B

    Exhaust options

    I have this set-up on my car. The challenge is you will need to eliminate the EGR and secondary air system. You will need the tune adjusted to turn off those systems to avoid engine lights. I also have no cats but i forgot if I had to reinstall the second O2 sensor. I still pass emmisions but...
  18. B

    Opal's Revenge

    Sweeeeetttt!
  19. B

    Finally

    Can't wait to see it. It was in very nice condition before you started rebuilding it.
Top