Blower motor Jumper wire

[Green Machine]

Does anyone know if the Jumper wire that goes from the blower motor control, to the blower motor, is the same on all years? 1st gen-2nd gen. Mine is slightly burnt and wont work. Ive tried to get the wires out of the plugs to clean but no go. figured id just replace.

 

[M Darrah]

Yes, it's the same for all years. Part # is: F3LY-18C629-A
Retail price is about $30 but you should be able to get a discount from some place like Tousley Ford.

BTW, if you get a new one, double check it against the old one before you install it. There have been a bunch of people reporting that the replacement jumper has the leads reversed. It's a simple matter to swap the pins, but just letting you know to look out for it.

 

[Gary123]

Yes, it's the same for all years. Part # is: F3LY-18C629-A
Retail price is about $30 but you should be able to get a discount from some place like Tousley Ford.

BTW, if you get a new one, double check it against the old one before you install it. There have been a bunch of people reporting that the replacement jumper has the leads reversed. It's a simple matter to swap the pins, but just letting you know to look out for it.

is this a gen 2 plug
getting real tired of reaching under the dash and wiggling it