Different headlight question

[chadly]

So I got my new HID bulb from Jeremy, it finally stopped raining long enough to put it in so I change it out, turn them on, and nothing. I was like WTF? Theres gotta be something wrong here. I did some searching, and sure enough, there is a wire stripped out at the connector. Not the one on top where the light plugs in, but down lower. One end goes to the ballast and the other end goes back towards the engine bay. I'm guessing its the power going to the ballast for the drivers side. I have no idea how this got pulled apart. Gonna fix it tomorrow and hopefully i will have a DS headlight again.

One side has blue and grey wires, other side has red black. Any ideas which ones to solder together? Thanks in advance.

 

[J]

Just look at the harness. I thought I did a write up on this. Here is Doug's. (which is probably why I didn't do one)

http://www.lincolnsofdistinction.org/vbulletin/showthread.php?p=186263

 

[chadly]

Yeah I looked at that but didnt really help much. I guess I could just ohm out the connector and go from there. Thanks though

 

[J]

I can go look at my car. I'm pretty sure the wires were red and blue.

 

[chadly]

Well I ohmed out the connector that got ripped out just to be sure it was straight through, and it was. So I soldered the wires together and I now have 2 working headlights, and a spare since the one I bought wasnt really needed. Thanks for the assistance.