FS: Gen 2 parts for sale. Some Gen 1 fenders ect.

[Sierra3]

The 98 Black LSC sold today. Last chance at the rest of this stuff cause its going bye bye on Monday.

Still have these parts leftover in three pics to follow. Gen one fenders, Gen two fenders, Gen one drivers 1/4 panel, Gen 1 and Gen 2 Doors. 97 Gen 2 Rear black bumper cover with exhaust cutouts, Gen one exhaust complete, Gen 2 Exhaust complete with O2 Sensors. Gen 1 hood. Gen 2 Trunk lid, a whole bunch of 97 -98 interior black box controls and misc parts, Mirrors Gen one and Gen 2. Gen 2 complete roof and moon roof, Gen 2 lower rocker panels, minor dents, but no rust.

Complete Hydro boost setup from a Mustang Car. never ended up using the entire kit. reservoir, pump, Lines, and everything needed.

Perfect condition Black Gen 2 door panels, Rear interior panels, 98 LSC Black front seat lower plastics with all screws, no broken tabs. Black seat belt set, Center console with wood trim, Yes the cupholders work, not broke. 98 Black Rear upper and lower black leather seats. Two front K members complete 250.00 each.

(2) 4R70W transmissions. 350.00 each. Both were running before parting out cars. One of them looks rebuilt with new seals and pump, bolts ect.

I can't ship any of this except the small items, You must come and pick up. This pole barn is being taken down and sold for a larger one. All this stuff must be gone. I have ALOT of stuff in a 40' shipping container in storage. Email me what you need. Ill see if i have it. Was cleaning it out today and threw out ALOT of plastics and seats and door panels ect that were not perfect. Also thrown out 3 front bumper covrs, two rear ones. All this stuff has to be gone. Cheap.

- - - Updated - - -



- - - Updated - - -



- - - Updated - - -



- - - Updated - - -

 

[Sierra3]

Also have both sides original Gen 1 cats and manifolds in the shipping container with the transmissions and nice interior parts in there. Gen 2 DOHC heads and covers and front timing cover with all chains and insides. Have one more Teksid Gen 2 short block with pistons and rods and crank for 400.00. Kept the other one and sent it out to be cleaned up and stuff for my blown engine. My phone number is 850-225-0034. These and my phone is posted on Craigslist as well. Alot faster to call me straight out or text me. Im away alot from home. Busy finishing up school and working odd hours.

 

[tixer]

If only I'd been thinking when I went down to Georgia..

I could use the gas tank, and a sunroof assembly. The mechanicals on mine are broken in a few places now..

If somehow, that stuff sticks around 'till next year, I'm in..

 

[Sierra3]

Will do Mike. Already pulled the sunroof for someone. That someone is you now. Hah. Ill grab the gas tank for you too when we hook up again. My sunroof internal plastic pieces were worn too. I robbed mine off the 93. Ill stash it in the shipping container. This weekend that pole barn will be gone. Guys going to buy it. Then a bigger one will be set there.

 

[Sierra3]

Will do Mike. Already pulled the sunroof for someone. That someone is you now. Hah. Ill grab the gas tank for you too when we hook up again. My sunroof internal plastic pieces were worn too. I robbed mine off the 93. Ill stash it in the shipping container. This weekend that pole barn will be gone. Guys going to buy it. Then a bigger one will be set there.

Here it is.

 

[tixer]

Thanks! Let me know if you need a "cash deposit." One question about the sunroof though. I've heard that the sunshade is basically riveted in place. Since I assume that you have the whole assembly out of the car, does that truly seem to be the case? I suppose it's not the end of the world, as I could just keep it open most of the time. I'm guessing yours is black. Mine's tan.

- - - Updated - - -

Actually, that's smaller than I thought it would be. And did you already have a buyer lined up? Or did they bail on it. I'd hate to snag it out from under someone else. Particularly if they could get to it before I could.

 

[markup97]

Where are you located at in Florida? I have some use for all the Black interior bits as my GEN2 is starting to show its age.

 

[BlackIceLSC]

too bad you wont ship. Id take a 98+ tranny from ya

 

[Sierra3]

Thanks! Let me know if you need a "cash deposit." One question about the sunroof though. I've heard that the sunshade is basically riveted in place. Since I assume that you have the whole assembly out of the car, does that truly seem to be the case? I suppose it's not the end of the world, as I could just keep it open most of the time. I'm guessing yours is black. Mine's tan.

- - - Updated - - -

Actually, that's smaller than I thought it would be. And did you already have a buyer lined up? Or did they bail on it. I'd hate to snag it out from under someone else. Particularly if they could get to it before I could.

I didnt really look at it how it comes apart, Just put them into the shipping container, i can check out if its riveted when i go back out there. I took the 98 black LSC one off as well to save it. Removing the inner slider shouldnt be a big deal, once its out and exposed, its easy to disassemble on a bench when you can get at it. I also grabbed the 2nd gen Brake controller ABS unit. So i have 4 sets of rear windows now and one sunroof from the black car if you buy the red one. The red one has a tan interior color like yours. It was the red model LSC. The tilt steering column was shot, so i didnt mess with it. Steering wheel is still good though. Dark Gray.

 

[Sierra3]

Where are you located at in Florida? I have some use for all the Black interior bits as my GEN2 is starting to show its age.

Look up Defuniak Springs FL ZIP is 32433 on google maps or GPS device. I'm up here in the panhandle from you. Call my cell and well set a date on the phone. My schedule is hectic lately. I have an entire 98 black LSC panel interior. All the panels are good and no scratches and all tabs are good. Entire center console with good cup holders, no scratches. 2 Perfect door panels with wires and speakers ect. All black. Come and get them all for one package price. There in the way. I also have the rear black LSC bumper cover with exhaust cutouts and LSC complete exhaust. Also another set of 93 complete exhausts. Not rusty, CATs good.

 

[Sierra3]

 

[Sierra3]

Both come with the torque convertors. 4R70W ones a 93 and the other is a 97. $350 each.

Ill also have my ART CAR stage 3 tranny up for sale once we pull it as well. I'm converting over a newer 2001 model from a mustang to work for the new engine.

 

[Sierra3]

too bad you wont ship. Id take a 98+ tranny from ya

I hear ya. I could ship it, but it would be too expensive im assuming unless you got a hook up from somone that works at a shipper company that can grab it for ya. I won't pay for the shipping to CA, it would kill ya...not worth it. How can you tell or do i know its a 98+ ? Im guessing the numbers stamped on the side of the case? These 2 are not 98. Ones a 93 from the black base model, and ones a 97 from the Red LSC. The 98 black LSC tranny was taken long ago with the motor.

- - - Updated - - -

 

[Sierra3]

 

[Sierra3]

 

[Sierra3]

- - - Updated - - -

 

[Sierra3]

my old 95 base model intake and IMRCs. Also have another complete IMRC intake unit from the 1993 as well.

 

[Sierra3]

4 new O2 Sensors for a 96 LSC never used. Make offer less than what new ones cost. These are Motorcraft, not the autozone cheapies.
Summitt coil packs 100.00 for the set.

 

[markup97]

You sound like me; a work schedule that is all over the place. I know roughly when I will be working at the first job, but the second job is the one in which work hours are erratic. I will shoot you a pm when I have some spare time and money!

I can use the Black interior components, as mine have been ravaged by Florida sun and an accident.

 

[Sierra3]

Works for me, just get me on the phone about two days ahead of time. I got everything black for the interior except the front seats and the dash. Those are gone. Rear seat is perfect also up and lower parts, door panels and entire center console is perfect. Two perfect black doors with windows and regulators in them. Just missing the LSC door trim. i may pull them also when he comes to get the car. Hes going to put that entire suspension and K member under his 65 ford pickup truck and have IRS rear and A arm suspension up front. Perfect fit. He will have to drill two holes further up, but the width works on his frame rails he said.