I set my seat and mirrors for 'memory 1' and it won't stay???

[Bud]

Everytime I use the remote to unlock the doors on my 95 mark viii, my seat and mirrors change. How do I set my memory to stay.

I think it has to do with this:
http://mark8.org/lod/remote93_96.htm

 

[sleeper]

use the other memory position

the remotes will usually automatically put the seats and mirros at either the 1 or 2 position. that way you get one key, the spouse gets the other, and everybody's happy by the time they open the door

 

[budpytko]

Your keyfob should have a switch on the back (Switch 1 or 2 position). Select which position you wish to program, then use your directions as per your link.

If you do NOT have that type keyfob, you will have to purchase one. eBay oftentimes has someone with them available.

Bud Pytko
'97 LSC Silver Frost
'05 F250 SD CC PSD 4 X 4 AZ Beige
'94 Prowler 5th Wheel
http://myfilelocker.comcast.net/charlespytko/Lincoln/BudPytko97LSC.JPG

 

[jbuch]

If you have a 1st gen ('93-'96) look on the back of the remote. It should say "Transmitter 1" or "Transmitter 2." It corresponds to the memory position that it will set the seat and mirrors to when you use that remote.

 

[budpytko]

My '97 also has that switch....


Bud Pytko
'97 LSC Silver Frost
'05 F250 SD CC PSD 4 X 4 AZ Beige
'94 Prowler 5th Wheel
http://myfilelocker.comcast.net/charlespytko/Lincoln/BudPytko97LSC.JPG

 

[jbuch]

[div class="dcquote"][strong]Quote[/strong]
My '97 also has that switch....
[/div]
1st gen doesn't have a switch; it's imprinted on the shell. I have two remotes, one says "Transmitter 1" and the other one says "Transmitter 2." A switch would definitely be more convenient though.