Any one in or near wisconsin interested in doing a blend door repair the local dealership wants $900.00. I am somewhat mechanically inclined but i dont think thats a job for me. I could pay around $500 if someone is close and interested.
I'm about an hour and a half away in the NW Chicago burbs and could drive up there if you're still looking. I'm free this weekend as long as there isn't a blizzard. I've done the swap about four times on various peoples' cars so I'm familiar with it. It's maybe an hour and a half job or less. Do you have a garage so we can do it inside? That's all I'm concerned about.
At most all I'd ask for is maybe a lunch. Send me a PM if you want to arrange it.
Ok i changed the blend door actuator today and still no heat i can reach under the glove box and feel the blend door move back and forth as i change the temp but im getting no heat still blowing cold.
In the weather you've been having??? No, I'll bet you didn't!! Reove that cap with a BFW and see if it shows full there. Be sure it's cool when you do it.
I checked the coolant a little low about half a container of coolant filled it but still no heat. If i turn the temp to 60 it gets colder turn it to 90 it changes temp just not warm.
I checked the coolant a little low about half a container of coolant filled it but still no heat. If i turn the temp to 60 it gets colder turn it to 90 it changes temp just not warm.
my coolant level is good just not getting warm air should i replace the thermostat just in case also i bought the car i florida do you think the previous owner may have had a higher or cooler temp thermostat.