Well, here is a quick (but effective) write up on changing the front sway bar links. First of all jack the car up and take off the 2 front wheels, then remove all 4 nuts on each sway bar link (there's 2 on each one). Now turn the steering wheel so you can get enough clearence to get each one through (I don't remember exactly which way is best for each one but it'll give you enough clearence).If you want more than enough room you can remove the brake line from the caliper but then you'll have to bleed the brakes aftewards. After getting the old ones out put on both new ones, and make sure not to tighten the nuts until both of them are in and ready to go. After you have each link on the vehicle tighten the nuts to 39-53 lb. ft (basically as hard as you can with a normal wrench). Then put the wheel back ona nd you're ready to go. Don't listen to all that jargon in the manual it will just confuse and piss you off.