Jamesvinar
New member
So... You're gonna hate me for this but guess what... The issue came back. Good pressure is there for a few minutes but then just drops... I would try the FPR but It looks like it's welded to the car...
Slow to start
- Thread starter Jamesvinar
- Start date
Jamesvinar
New member
The problem is with holding pressure it seems, I removed the injectors and put the key on ON but nothing seemed to leak.
Jamesvinar
New member
I have a very small leak from the upper rad hose but thats been there forever. Otherwise nothing
Jamesvinar
New member
Well the problem was a bad pump assembly. On gen 2s the check valve is outside of the pump, seems like the only info out there was for gen 1s so i assumed it didnt change. I used a pin and a few good whacks against the wall to reseat it until the new assembly comes in. Dont know if im gonna switch the pump for the delphi i bought. Has a carter in the new assembly and dont know if theyre any good