Mad1stGen
Booster
After bringing the car back home on Friday, I had to address some small issues that showed up during the brake in. Biggest of them was the blower/hood interference.
The engine would torque to the left in reverse only, and the oil fill plug would make the contact with the hood bracing.
I cut the brace a little and bent it up towards the outer skin.
It's invisible standing in front of the car, so it was a big relief. I really didn't want to cut up this fresh pearly hood anymore I had to
I also replaced the air ride compressor plug, and relay with brand new parts. I think this air ride system should be good for next 10 years. Part numbers for reference :thumbsup:
The engine would torque to the left in reverse only, and the oil fill plug would make the contact with the hood bracing.
I cut the brace a little and bent it up towards the outer skin.
It's invisible standing in front of the car, so it was a big relief. I really didn't want to cut up this fresh pearly hood anymore I had to
I also replaced the air ride compressor plug, and relay with brand new parts. I think this air ride system should be good for next 10 years. Part numbers for reference :thumbsup: