Search results

Im not sure about it but its not looking good... Car keeps overheating, the water is pouring out of the cap. It had a new radiator, new water pump and thermostat removed. Ran fine for long time then started to overheat. Water coming out the sides of the cap... again. So , i figured what the...

LOL, not literally. I want to get the gas out of my 97 and put it in my 93 - i spent all my money and dont have much gas, but the lsc has some, so i was wondering if anyone knows a quick easy way to get the gas out of the tank. I will not use my mouth to siphon it out, any other ways? Thanks

As most of you know I recently put in a Jasper Transmission in my 93 Lincoln mark. The old transmission had no 3rd or 4th gear. Well the installation went well thanks to a lot of you here that helped me. Now im noticing a 1 - 2 shift shudder when im just easing on it. If I hit it at WOT it...

Ok i got the transmission 98% removed. I did everything to unhook and get everything out of the way... First off... Will the transmission come off of the torque converter if i leave it bolted to the fly wheel ? I tried getting one of the TC bolts off and it stripped... and it does not look like...

Okay, I went to install my new head (radio) unit in the dash of my 93 mark viii with the premium JBL sound system, and I have the wiring diagram. I hooked everything up, I learned the cars speakers had been ripped out. So, ok , I yank the ones out of my 97 and put them in, wire em up - (ALL 8) ...

I am going to buy a Jasper Transmission... I dont know much about these manufacturers and i was wondering if you might have any info on them. The thing looks brand new, but the guy said the car it was in (a mark viii) was t-boned, apparently not too bad. What do you guys think?

Ok without fighting with anyone can I ask a simple question. I am getting a new 98 transmission, but idk if it was from a mark viii. Goes to a 4.6L (single cam 16 valve engine) . Will this bolt up to mine? It looks like mine and its a 4R70W . I didnt buy it because idk if first will go to 50...

So i used my 97 radiator to put in my 93. Now i see there is ALOT of room under the hood to work with, now that i have my fusebox , brake res, valvecover,alternator, waterpump, radiator all removed..... How hard is it at this point to just pull the head off with the motor in place?? I KNOW its...

Anyone got any 2nd Gen Engines for sale ?? Or just a head ? Thanks

My fuel filter wont come off, ive done this before and never remember having this trouble before.... The bottom "clip" came off and i even got the hose off, but the top hose, that goes to the motor, wont come off. I removed the belly band off the filter bottom hose is off and i removed the...

Hey im tryin to remove the bumper off the passenger side by the compressor area, my 97 was just like tucked in there in a certain way, this one seems to have a few clips that i cannot possibly get too. The dryer bottle came off the compressor and i cant get it on or out... any tips?? thanks

Ok so i bought a 93 mark and put a new waterpump in it... started to drive it to my house, which the motor makes a horrible tapping sound at around 1500 rpm to about 2500 rpm, sounds terrible but clears up when you past that rpm range. So i bought the car with a bad water pump, i changed it...

My beautiful 2nd gen LSC is going bye bye tommorow to a lady named christina of pt. pete florida. She is going to fix it and send me updates on how its going. I dont have the time nor resources to pull the motor and fix it. So tommorow she is going to pick it up, with a blown motor for $800...

Hey guys, well, i did it. I tore apart most of the drivers side of the engine...and i cant get the damn valve cover off. its 99% out but its stuck under the hood, seems like the back side of the valve cover is hitting the brake booster, pls dont tell me i have to take that off too ! Any tips on...

Okay, so i wont lie, i raced a WRX STI by the airport today, and i used a fresh bottle of nitrous. So it worked good. (Yes i won the race by a car length, with 3 people in the car) - Anyways, after that, the engine started running rough, the temp was ok - it felt like it was missing a spark or...

Going to the track tonight, its the usual street drags, but my uncle is also coming with his 7 second firebird, im going to get video and post on youtube and post the link here along with the times. Wish me luck !!

My electric telescoping tilt failed recently, it worked before, up and down worked but i had to wiggle the switch to get it to move up or down,now it don't work at all. The telescoping part (front to back) never worked. - I thought maybe it was my key switch that tells it to telescope, but the...

Okay, i know a little about the air-ride system. A friend of mine has a 1st gen mark 8 and its slammed to the ground. I looked at it for about 10 min and i found this The compressor DOES come on, and sounds relatively healthy. She says the front lifts up sometimes, just not the back - but i...

I need a cobra intake like a dog needs a bone. Cant find any local, and the speed parts shop dont have one for a 4v 4.6L . Only the mustang 2v :( Anyone have an extra one or trying to sell one? Let me know immediatly !!! Also, what are some good headers? My race parts shop dont carry any...

What is the fuel pressure on a stock 1997 lsc ? At the fuel rail. - I mean what is it "supposed" to be at from the factory