Recent content by 4.6mark

  1. 4.6mark

    Telescoping wheel problem

    So today i get into my mark put my key in and my steering wheel decides its going to telescope all the way out on its own...it gets as far out as it can then clicks a couple of times and stops... now when i go to move it back in it does absolutely nothing and when i hit it to go foreword more...
  2. 4.6mark

    WTB: WTB 93 Driveshaft

    looking for a 93 1 piece driveshaft that anyone may be looking to get rid of. just let me know condition and price.
  3. 4.6mark

    burning oil

    I have a 98 lsc and lately the car has been burning a bit of oil, typically between oil changes i have to add a quart sometime more depending on how much i get on it. Last time i had done the plugs they were soaked in oil, which i know these cars are notorious for, so my question is could my...
  4. 4.6mark

    weird issue

    i have a 98 mark viii lsc ever since i reflashed the computer with my xcal2 its been having this weird problem while coasting if i dont touch the gas and coast for say 10-15 seconds in drive the engine seems like it bogs down and when the car slows enough for the rpm to reach around 1100rpm the...
  5. 4.6mark

    cobra cam swap

    I was reading on LVC that some guys swap in the 96-68 cobra intake cams in the marks and is supposedly worth around 10whp I was wondering if anybody has any experience with this and if it was worth it, and would I need. Retune afterwords
  6. 4.6mark

    intake

    i have a 98 lsc and i was wondering if there is anyway to get the stock intake to breath a little better. Ive heard its not the best intake and i was looking to get a 96-98 cobra intake on it but they can be expensive so im looking for a cheaper solution if porting it is at all an option.
  7. 4.6mark

    4.10 question

    i want to have some 4.10 gears installed in my 98 lsc down the road and just want to doulbe check, but would i need to get a dyno tune after having them installed or could i just have my xcal2 reflashed for the 4.10 or is any of that not even necessary and i can just have them put in with no...
  8. 4.6mark

    white face gauges

    does anyone know where i can find some white face gauges for a gen II?
  9. 4.6mark

    problem with abs and traction

    a friend of mine owns a 93 mark viii and his abs light keeps coming on and everytime it does it turns his traction control off, you can kit the button but nothing happens this just started a couple days ago and i want to figure out whats going on since he almost went into a wall because his...
  10. 4.6mark

    tune problem

    i just purchased a xcalibrator 2 from lonnie. i do everything the instructions state and have no problems untill after the tune and i give it WOT, my car feels real slugish and down on power but if i return to stock its completely fine and runs like it should there is no idle problem and no...
  11. 4.6mark

    gen 1 intake vs. sn-95 cobra intake

    im looking to get a different intake on my 98 lsc. i know alot of people put the cobra intake on our cars with good gains in performance, but i also red that the gen one intake has better flow and performance than the cobra and wanted to know if its possible to put a gen 1 intake on a gen two...
  12. 4.6mark

    ud pulleys

    to install underdrive pulleys i would need to purchase a puller to get the crank pulley off right? just want to double check so im not trying to pull it off for hours and getting frustrated.
  13. 4.6mark

    B&M shiftplus

    does anyone know if the B&M ShiftPlus Electronic Shift Improver will work with a 98 mark? it only lists it workin with up to a 97 and i would like somethin to get me firmer shift but isnt to hard to install.
  14. 4.6mark

    help

    since i have owned my 98 mark viii lsc i have been having a problem with it. It is slugish off the line and goes no where when you open it up. When you hit 3 grand the motor starts to sound like its mis fireing. the computer threw me a p1519 but the IMRCs are not stuck and i changed out the...
  15. 4.6mark

    2.5 exhaust question

    is it worth it to get a full 2.5 exhaust cat back on my mark? i only plan on doing basic bolt on's to it and was wondering if i would just be better off getting the third cat cut out and having an x pipe installed and just going with good performance mufflers.
Back
Top