I had a similar experience with Rock Auto recently.
I ordered Brembo Caliper rebuild kits saying they had 8 in stock got the email two days later that they had none in stock for my front Calipers after the invoice had been paid. This was a $32.00 dollar order. The next repair or rebuild kits...
The 98 is a one year only wheel speed sensor and they cannot be bought new. Did you get 1998 wheel speed sensors because if not then that is your problem or you got a bad one to replace a bad one.
For me it was awesome to finally meet all of you that were there. It was well worth the run from Toronto to come and meet so many from all over. I hope that I can get my Mark up to snuff to be in the company of so many nice examples for next year. All though, having the ability to throw 4 others...
If the rivet spins could you not use say a cut off wheel or Dremel with a carbide bit, cut one end off and then punch out the remaining piece of the rivet with a hammer and drift?
Just a thought as I have never gone into a seat track in any way. There are other ways to skin this cat!!
It seems that all is going to fall into place and as of last night I got the ok from the boss that I can head on out to the Meet. I will not be driving the Mark as it is still in storage and I cannot get to all I have to do in a short amount of time. I have piles of things that I have to do on...
The CE touches look great in the car. I have to agree the Blue with black interior looks great. Did you do a color change on the steering wheel or is it one that was made by Alexander?
No you are doing nothing with the bearings as they are a sealed unit. The rotor is a floating rotor that just slides on over the center hub and wheel studs. This is after you remove the caliper. Brakes on the new stuff is easy compared to our old set ups from the past.
No Sale!!
If it even came close to the number I would be very surprised. Yeah it looks pretty and all but in reality is it put together as good and as nice as J puts them together? Hyland sure does build a hell of a Mod motor for sure, but the electrical distribution block in the trunk exposed...
Since the car was beat down do not "flush" the trans. As stated before drain and refill that includes the converter and use Mercon V as it is the only fluid that is to be used in these.